Regent Street Polytechnic

This topic has 1 reply, 1 voice, and was last updated 24 March 2014 at 14:27 by MICHAEL WILLIAMS.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
24 March 2014 at 14:27 #23218
MICHAEL WILLIAMS
Participant
@michaelwilliams41215
Advert

24 March 2014 at 14:27 #147914
MICHAEL WILLIAMS
Participant
@michaelwilliams41215
I’ve just been reading quite a lot of material about Regent Street Polytechnic on the web .

Must have been quite a place a hundred or more years ago and very advanced in quality of technical teaching by the standards of the day .

A surprisingly large number of early contributers to Model Engineer seem to have studied there according to their own accounts .

It’s still very much alive but very different now .

Do any members have first hand knowledge of going there themselves or know any of the well known names in model engineering who did ??

Michael Williams .
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 39
- 129
- 10 July 2026 at 06:43
  John Haine
- BridgePort Interact 1 Mk2 parameters
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:31
  tomcnc
- Bridgeport Interact 1 Mark 2 circuit diagrams
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:16
  tomcnc
- Hole Sizes
  Started by: John Purdy in: 3D Printers and 3D Printing
- 6
- 7
- 9 July 2026 at 21:22
  Fulmen
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 5
- 5
- 9 July 2026 at 20:27
  Wade Beatty
- Tom Senior Vertical Mill Y axis stuck
  Started by: tgglass in: Beginners questions
- 12
- 18
- 9 July 2026 at 19:08
  Michael Gilligan
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 1
- 2
- 9 July 2026 at 18:01
  old mart
- Transformer question
  Started by: Wade Beatty in: Electronics in the Workshop
- 3
- 5
- 9 July 2026 at 17:30
  Robert Atkinson 2
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 14
- 20
- 9 July 2026 at 13:21
  Russell Eberhardt
- Impending collapse in NYC
  Started by: Michael Gilligan in: The Tea Room
- 9
- 14
- 9 July 2026 at 12:58
  Martin Johnson 1
- Spindle/bearings fit query for X2 type mill 1 2 3
  Started by: fingerscrossed in: Manual machine tools
- 14
- 52
- 9 July 2026 at 12:47
  teamricky
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 66
- 9 July 2026 at 11:47
  KEITH BEAUMONT
- When is a new 90 degree drill not 90 degrees? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 16
- 37
- 9 July 2026 at 02:30
  alecs
- Cotton-covered flex
  Started by: Kiwi Bloke in: Materials
- 8
- 9
- 9 July 2026 at 01:33
  Kiwi Bloke
- Offen imperial bore mic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 6
- 11
- 8 July 2026 at 22:27
  alecs
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 13
- 22
- 8 July 2026 at 10:48
  lucerne
- Flat Surface 1 2 3 4
  Started by: COLIN MARTIN 2 in: Materials
- 36
- 77
- 7 July 2026 at 23:34
  alecs
- Hello from new USA member
  Started by: grizmaster in: Introduce Yourself – New members start here!
- 3
- 3
- 7 July 2026 at 22:47
  noel shelley
- Mini-lathe parts source
  Started by: Dunc in: General Questions
- 2
- 2
- 7 July 2026 at 20:37
  JasonB
- McLaren 1,5 inch scale Modl Traction Engine
  Started by: Mike Cooke in: General Questions
- 1
- 1
- 7 July 2026 at 20:08
  Mike Cooke
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 8
- 14
- 7 July 2026 at 19:29
  Speedy Builder5
- Readability / clarity in new combined magazine 1 2
  Started by: Trevor Gale in: Model Engineer & Workshop
- 19
- 35
- 7 July 2026 at 18:24
  JasonB
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 29
- 75
- 7 July 2026 at 14:02
  Bazyle
- Identifying the pitch of threading inserts
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 6
- 13
- 6 July 2026 at 20:13
  old mart
- Valuatiion of severql models
  Started by: ron vale 3 in: Stationary engines
- 4
- 4
- 6 July 2026 at 19:23
  Weary

Regent Street Polytechnic

Regent Street Polytechnic

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies