Parkside Spanners

This topic has 1 reply, 2 voices, and was last updated 16 December 2025 at 20:23 by Dod.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
16 December 2025 at 14:30 #828979
Vic
Participant
@vic
I thought I had enough spanners but I saw these in Lidl’s and realised that I don’t have ratchet spanners in 8mm and 9mm which may come in handy at some point? The other sizes in the set are 10mm, 13mm 14mm and 17mm. £8.99.
Advert

16 December 2025 at 20:23 #829001
Dod
Participant
@dod
I read the above post and realised that I also don’t have ratchet spanners after my 75th birthday last week so I don’t think I will be rushing out to buy a set.

Q. What is a ratchet

A, Same as a mouse shet but bigger.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 9
- 27
- 11 June 2026 at 23:15
  Nigel Graham 2
- Axminster Granite Surface Plate – Delamination of surface coating
  Started by: Greensands in: Workshop Tools and Tooling
- 8
- 8
- 11 June 2026 at 19:24
  Andy Stopford
- Gauge Glass Fitting
  Started by: Thomas Clarke in: General Questions
- 7
- 9
- 11 June 2026 at 17:55
  Dave Halford
- My adventures with a bench top CNC mill 1 2 3
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 7
- 58
- 11 June 2026 at 17:44
  John Hinkley
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 8
- 26
- 11 June 2026 at 17:22
  jaCK Hobson
- international exhibition 1862
  Started by: duncan webster 1 in: The Tea Room
- 8
- 12
- 11 June 2026 at 17:19
  JA
- Noggin End Metals?
  Started by: anonymouse in: Materials
- 3
- 4
- 11 June 2026 at 16:41
  anonymouse
- Running 380V 3-phase motor on 230V 1-phase
  Started by: jimalm in: Electronics in the Workshop
- 9
- 14
- 11 June 2026 at 16:08
  Bob Worsley
- An extraordinary lathe bargain?
  Started by: Robin Graham in: The Tea Room
- 12
- 18
- 11 June 2026 at 12:44
  Howard Lewis
- Chester Machine Tools Hobby Open Week
  Started by: Neil Wyatt in: Exhibitions, Shows and Club Events
- 1
- 1
- 11 June 2026 at 11:19
  Neil Wyatt
- Fusion CAD / CAM Problem
  Started by: Shaun Churchill in: CAD – Technical drawing & design
- 4
- 6
- 10 June 2026 at 19:18
  Alan Wood 4
- Lightning 1 2
  Started by: duncan webster 1 in: Electronics in the Workshop
- 12
- 38
- 10 June 2026 at 17:57
  Macolm
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 5
- 5
- 10 June 2026 at 09:10
  Bo’sun
- Another new member in France
  Started by: jimalm in: Introduce Yourself – New members start here!
- 6
- 6
- 9 June 2026 at 18:02
  Speedy Builder5
- PM,s
  Started by: Redpiperbob in: General Questions
- 3
- 6
- 9 June 2026 at 16:37
  peak4
- RS & J 4NHP in 2″ scale
  Started by: TREVOR WILSON in: Traction engines
- 2
- 2
- 9 June 2026 at 15:56
  Dave Halford
- Breaking gears in a Myford ML7
  Started by: drnewcomb in: Manual machine tools
- 14
- 21
- 9 June 2026 at 12:19
  Speedy Builder5
- Cheap digital spirit level accuracy 1 2
  Started by: Mick Bailey in: Workshop Tools and Tooling
- 18
- 44
- 9 June 2026 at 11:56
  Nicholas Farr
- Nickel Silver
  Started by: Carl in: Materials
- 10
- 13
- 8 June 2026 at 22:46
  old mart
- Steam wagon “Meg” advice, please.
  Started by: Mike Henderson 1 in: Traction engines
- 6
- 10
- 8 June 2026 at 22:19
  [email protected]
- S,O,D 1 2
  Started by: larry phelan 1 in: The Tea Room
- 27
- 30
- 8 June 2026 at 18:14
  Roderick Jenkins
- Improving a 30 taper fit
  Started by: Andrew Skinner in: Manual machine tools
- 11
- 18
- 8 June 2026 at 17:11
  bernard towers
- where to find locomotive / train plans ?
  Started by: zuji miko in: Beginners questions
- 5
- 7
- 8 June 2026 at 16:32
  JA
- 4 cylinder rotary valve
  Started by: AStroud in: Work In Progress and completed items
- 5
- 13
- 8 June 2026 at 16:15
  AStroud
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 112
- 8 June 2026 at 12:58
  renardiere7

Parkside Spanners

Parkside Spanners

Latest Replies

Latest Issue

May 2026

Newsletter Sign-up

Latest Replies