new member

new member

This topic has 6 replies, 5 voices, and was last updated 29 November 2017 at 11:00 by Ian S C.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
28 November 2017 at 15:40 #329596
john holland 4
Participant
@johnholland4
Writing my first post so I can access classified adverts. John Holland
Advert

28 November 2017 at 15:40 #40219
john holland 4
Participant
@johnholland4
28 November 2017 at 16:11 #329603
Robin
Participant
@robin
I didn't know there were classified ads, how exciting
28 November 2017 at 17:47 #329622
Brian Wood
Participant
@brianwood45127
Robin,

They are listed further down on the Forum page, both Sales and Wants

Brian
28 November 2017 at 18:43 #329631
Neil Wyatt
Moderator
@neilwyatt
Posted by john holland 4 on 28/11/2017 15:40:04:

Writing my first post so I can access classified adverts. John Holland

You need a second, please John.

Neil
28 November 2017 at 18:55 #329632
john holland 4
Participant
@johnholland4
My second post to validate access to classified adverts. John Holland.

Edited By JasonB on 28/11/2017 19:03:57
29 November 2017 at 11:00 #329735
Ian S C
Participant
@iansc
John, welcome aboard, stick around, you will learn things, and maybe we can too.

Ian S C
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Making curved parts
  Started by: Steve Huckins in: Beginners questions
- 7
- 11
- 15 September 2026 at 23:51
  Pete
- pendulum support springs
  Started by: gerry madden in: Clocks and Scientific Instruments
- 1
- 1
- 15 September 2026 at 23:43
  gerry madden
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 6
- 9
- 15 September 2026 at 23:24
  blowlamp
- Microscope eyepieces
  Started by: gerry madden in: Clocks and Scientific Instruments
- 3
- 7
- 15 September 2026 at 23:20
  gerry madden
- Pittler C3 lathe, dividing and gear cutting attachments
  Started by: vic newey in: Workshop Tools and Tooling
- 3
- 3
- 15 September 2026 at 22:57
  Nigel Graham 2
- Have I got 12-28 UNF wrong or has Völkel?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 12
- 20
- 15 September 2026 at 21:57
  mark costello 1
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 8
- 20
- 15 September 2026 at 20:26
  Wade Beatty
- Robinson scale engine
  Started by: Frank Waugh in: Stationary engines
- 2
- 2
- 15 September 2026 at 18:49
  JasonB
- New to castings
  Started by: BOB BLACKSHAW 1 in: Workshop Techniques
- 4
- 8
- 15 September 2026 at 18:06
  JasonB
- Do you chase a galvanized thread, or leave it alone?
  Started by: elowen01 in: Workshop Tools and Tooling
- 6
- 8
- 15 September 2026 at 16:49
  noel shelley
- … I had hoped we were growing-out of this nonsense !
  Started by: Michael Gilligan in: The Tea Room
- 13
- 16
- 15 September 2026 at 16:42
  Graham Meek
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 4
- 4
- 15 September 2026 at 16:31
  DC31k
- Myford ML7 Motor
  Started by: ian Holdsworth in: Manual machine tools
- 4
- 4
- 15 September 2026 at 09:57
  Michael Gilligan
- Octopus Heat Pump 1 2 3
  Started by: Michael Gilligan in: The Tea Room
- 20
- 63
- 15 September 2026 at 09:46
  Michael Gilligan
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 2
- 3
- 15 September 2026 at 08:40
  bernard towers
- Drive coil ampere turns for seconds pendulum
  Started by: carlw in: Clocks and Scientific Instruments
- 3
- 9
- 15 September 2026 at 01:09
  carlw
- 4¾” 13swg copper tubing?
  Started by: martynt50 in: Materials
- 8
- 10
- 14 September 2026 at 22:36
  Mick Bailey
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 12
- 15
- 14 September 2026 at 21:57
  Mike Crossfield
- Quorn Belt Guard
  Started by: John Purdy in: 3D Printers and 3D Printing
- 9
- 13
- 14 September 2026 at 21:34
  John Purdy
- Revolution – The Future is Out There!
  Started by: JasonB in: Stationary engines
- 3
- 5
- 14 September 2026 at 20:50
  JA
- Tractor meeting in Babenhausen with a small model exhibition
  Started by: Werner Schleidt in: Traction engines
- 2
- 2
- 14 September 2026 at 20:15
  Roger B
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 2
- 2
- 14 September 2026 at 18:54
  JasonB
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 6
- 14 September 2026 at 18:11
  Richard B
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 6
- 13
- 14 September 2026 at 18:07
  Mick Bailey
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 12
- 14 September 2026 at 16:29
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies