Mystery Slide

Mystery Slide

This topic has 6 replies, 4 voices, and was last updated 18 July 2012 at 08:50 by Michael Gilligan.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
17 July 2012 at 13:07 #94619
Michael Gilligan
Participant
@michaelgilligan61133
Please see Photo Album

I bought this at the Car Boot Sale

I know what is going to be but I don't know what it was.

The paint colour shouts "Record" and I suspect that it came from a Woodworker's Mortising Machine, but I would be grateful for confirmation [or alternative ideas].

Thanks

MichaelG.
Advert

17 July 2012 at 13:07 #11964
Michael Gilligan
Participant
@michaelgilligan61133
What is it ?
17 July 2012 at 13:21 #94620
JasonB
Moderator
@jasonb
If it is off a woodworking machine then probably a slot morticing attachment to go on the side of a planer.

J
17 July 2012 at 22:40 #94656
Nobby
Participant
@nobby
Hi
Could it be off a small hand operated surface grinder ?

Nobby
17 July 2012 at 22:44 #94657
Michael Gilligan
Participant
@michaelgilligan61133
Thanks both …

Interesting possibilities.

MichaelG.
18 July 2012 at 02:36 #94667
Springbok
Participant
@springbok
Certainly the correct colour and finish to be Record. thought I had seen most Record kit over the years but not this,

Bob
18 July 2012 at 08:50 #94673
Michael Gilligan
Participant
@michaelgilligan61133
Bob,

Do you think the stamped number looks like a Record part number, or is it just someone's own id mark?

… note that something has been obliterated, at the other side.

MichaelG.
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Rotary table Chuck mounting.
  Started by: John Gray 7 in: General Questions
- 6
- 7
- 7 August 2025 at 00:27
  Nigel Graham 2
- Fobco or a Clarke CMD 1225 milling capabilities? or other recommendations?
  Started by: jacobsmess in: Workshop Tools and Tooling
- 3
- 3
- 7 August 2025 at 00:22
  howardb
- Pre-Setting 4-Jaw Chucks Hack for Quick Centering
  Started by: dbwjbp in: Workshop Techniques
- 10
- 11
- 7 August 2025 at 00:15
  Nigel Graham 2
- New member (a young’un)
  Started by: tomread12 in: Introduce Yourself – New members start here!
- 6
- 7
- 6 August 2025 at 22:45
  Taf_Pembs
- Bandsaw vs Powered Hacksaw vs Chop Saw?
  Started by: MarkS in: General Questions
- 18
- 23
- 6 August 2025 at 21:53
  grubscrew
- DELL / StarTech [mechanical incompatibilty]
  Started by: Michael Gilligan in: Electronics in the Workshop
- 3
- 4
- 6 August 2025 at 21:43
  Michael Gilligan
- Fobco Star (Universal) Milling capabilities? or a Clarke CMD 1225?
  Started by: jacobsmess in: Workshop Tools and Tooling
- 1
- 1
- 6 August 2025 at 21:26
  jacobsmess
- Save your Swarf!
  Started by: Vic in: The Tea Room
- 9
- 9
- 6 August 2025 at 21:12
  Grizzly bear
- Boiler Design – issue 4765 1 2 … 10 11
  Started by: Charles Lamont in: Model Engineer & Workshop
- 29
- 253
- 6 August 2025 at 20:28
  Nicholas Farr
- Depth of cut cowells me90 1 2
  Started by: kinross1 in: Manual machine tools
- 14
- 39
- 6 August 2025 at 18:39
  Richard B
- Help recommend a milling machine? 1 2
  Started by: richard1989 in: Beginners questions
- 21
- 33
- 6 August 2025 at 13:50
  Pete
- Cutting down a linear glass DRO encoder
  Started by: Robin Graham in: Beginners questions
- 9
- 18
- 6 August 2025 at 13:20
  Mark Hall
- UK Steel Supplier? 125 x 125 x 50 BMS 1 2
  Started by: MarkS in: General Questions
- 13
- 27
- 6 August 2025 at 12:58
  MarkS
- Smart Meter Change-over Problems
  Started by: Alistair Robertson 1 in: The Tea Room
- 8
- 8
- 6 August 2025 at 11:44
  SillyOldDuffer
- MD65 leadscrew cross-slide stuck in nut
  Started by: leov in: Manual machine tools
- 9
- 18
- 6 August 2025 at 11:07
  leov
- Pratt Bernard Grip true issues
  Started by: teamricky in: Workshop Tools and Tooling
- 7
- 10
- 6 August 2025 at 11:00
  SillyOldDuffer
- F360 stock from solid
  Started by: Roderick Jenkins in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 13
- 6 August 2025 at 10:34
  John Haine
- Collet identification
  Started by: David Colwill in: General Questions
- 7
- 16
- 6 August 2025 at 05:28
  AJAX
- Arc Euro Trade Ltd. 1 2 3
  Started by: Ketan Swali in: General Questions
- 54
- 65
- 5 August 2025 at 23:33
  howardb
- Ultra Newcomer Lathe Setup Query
  Started by: Brahma in: Beginners questions
- 10
- 25
- 5 August 2025 at 19:49
  Dave Halford
- Will iron rivets expand to fill oversized hole?
  Started by: Arthur Jones 2 in: Locomotives
- 6
- 6
- 5 August 2025 at 19:46
  Robert Atkinson 2
- New Compressor
  Started by: Andy Brocklehurst in: General Questions
- 8
- 12
- 5 August 2025 at 19:40
  noel shelley
- 14mm mild steel tube – I thought this would’ve easy…..
  Started by: Mick Bailey in: Materials
- 6
- 13
- 5 August 2025 at 18:48
  Mick Bailey
- MIG Welder Won’t Weld
  Started by: Martyn Nutland 1 in: Workshop Techniques
- 14
- 16
- 5 August 2025 at 17:51
  simondavies3
- Model Engineer Magazine Collection
  Started by: mfengine1 in: Books
- 9
- 15
- 5 August 2025 at 15:12
  Norman Blackburn 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies