Myford ML7RB backgear cluster

Myford ML7RB backgear cluster

This topic has 26 replies, 8 voices, and was last updated 13 April 2020 at 16:42 by Brian Wood.

Viewing 2 posts - 26 through 27 (of 27 total)

Author

Posts
13 April 2020 at 15:08 #464402
not done it yet
Participant
@notdoneityet
the oil was drained, fresh oil added and the lathe was added to the stock for sale.

Not sure how they did that. They are open gears. One can take off the lid and squirt oil in, but it will run out of the bottom of the lathe.
Advert

13 April 2020 at 16:42 #464426
Brian Wood
Participant
@brianwood45127
Not done it yet,

I have read John's article in the Raglan entry in http://www.lathes.co.uk literature again just now, funny how you mis-remember things. To make the correction, what he did say was that the gearbox was given a good wash out following the bedding in treatment and the gears were re-oiled.

I stand corrected!!

Regards

Brian
Author

Posts

Viewing 2 posts - 26 through 27 (of 27 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Boiler hydraulic test 4 hours 1 2
  Started by: endckr111 in: Stationary engines
- 13
- 34
- 7 August 2025 at 22:48
  endckr111
- Just How Many File Types Do We Need?
  Started by: Nigel Graham 2 in: The Tea Room
- 4
- 4
- 7 August 2025 at 22:17
  Kiwi Bloke
- MD65 leadscrew cross-slide stuck in nut
  Started by: leov in: Manual machine tools
- 9
- 20
- 7 August 2025 at 20:54
  old mart
- Fobco or a Clarke CMD 1225 milling capabilities? or other recommendations?
  Started by: jacobsmess in: Workshop Tools and Tooling
- 4
- 15
- 7 August 2025 at 20:46
  jacobsmess
- Arc Euro Trade Ltd. 1 2 3
  Started by: Ketan Swali in: General Questions
- 55
- 66
- 7 August 2025 at 20:07
  andy198712
- quality 3 and 4 jaw chucks
  Started by: Steve Huckins in: Workshop Tools and Tooling
- 2
- 2
- 7 August 2025 at 18:23
  thisdesignedthat
- Model Turbines 1 2 … 24 25
  Started by: Turbine Guy in: Stationary engines
- 28
- 611
- 7 August 2025 at 16:44
  Turbine Guy
- Pragotron Slave Clock
  Started by: renardiere7 in: Clocks and Scientific Instruments
- 7
- 18
- 7 August 2025 at 16:28
  renardiere7
- Miniature parts maker in Leicester?
  Started by: wilson logan 1 in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 7 August 2025 at 16:11
  Michael Gilligan
- Pratt Bernard Grip true issues
  Started by: teamricky in: Workshop Tools and Tooling
- 7
- 11
- 7 August 2025 at 16:04
  teamricky
- Will iron rivets expand to fill oversized hole?
  Started by: Arthur Jones 2 in: Locomotives
- 6
- 8
- 7 August 2025 at 14:41
  parovoz
- UK Steel Supplier? 125 x 125 x 50 BMS 1 2
  Started by: MarkS in: General Questions
- 14
- 29
- 7 August 2025 at 14:03
  Journeyman
- DELL / StarTech [mechanical incompatibilty]
  Started by: Michael Gilligan in: Electronics in the Workshop
- 3
- 11
- 7 August 2025 at 13:11
  Michael Gilligan
- Rotary table Chuck mounting.
  Started by: John Gray 7 in: General Questions
- 8
- 10
- 7 August 2025 at 12:31
  JasonB
- Boiler Design – issue 4765 1 2 … 10 11
  Started by: Charles Lamont in: Model Engineer & Workshop
- 29
- 260
- 7 August 2025 at 11:18
  JasonB
- Baumann Buco 1311 clock
  Started by: Clock polisher in: General Questions
- 1
- 1
- 7 August 2025 at 11:10
  Clock polisher
- New member (a young’un)
  Started by: tomread12 in: Introduce Yourself – New members start here!
- 7
- 8
- 7 August 2025 at 10:39
  parovoz
- Pre-Setting 4-Jaw Chucks Hack for Quick Centering
  Started by: dbwjbp in: Workshop Techniques
- 11
- 12
- 7 August 2025 at 10:06
  noel shelley
- Bandsaw vs Powered Hacksaw vs Chop Saw?
  Started by: MarkS in: General Questions
- 18
- 23
- 6 August 2025 at 21:53
  grubscrew
- Fobco Star (Universal) Milling capabilities? or a Clarke CMD 1225?
  Started by: jacobsmess in: Workshop Tools and Tooling
- 1
- 1
- 6 August 2025 at 21:26
  jacobsmess
- Save your Swarf!
  Started by: Vic in: The Tea Room
- 9
- 9
- 6 August 2025 at 21:12
  Grizzly bear
- Depth of cut cowells me90 1 2
  Started by: kinross1 in: Manual machine tools
- 14
- 39
- 6 August 2025 at 18:39
  Richard B
- Help recommend a milling machine? 1 2
  Started by: richard1989 in: Beginners questions
- 21
- 33
- 6 August 2025 at 13:50
  Pete
- Cutting down a linear glass DRO encoder
  Started by: Robin Graham in: Beginners questions
- 9
- 18
- 6 August 2025 at 13:20
  Mark Hall
- Smart Meter Change-over Problems
  Started by: Alistair Robertson 1 in: The Tea Room
- 8
- 8
- 6 August 2025 at 11:44
  SillyOldDuffer

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies