Myford ML7 leadscrew

This topic has 2 replies, 2 voices, and was last updated 4 May 2013 at 19:41 by Kris Lehane.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
4 May 2013 at 18:13 #118425
Nathan
Participant
@nathan
Hi, Can someone please post a photo of the gear train end of the ml7 leadscrew without any gears attached and tell me the distance from that end of the shaft to the woodruff slots?? basically I have the threaded section of the leadscrew but not the shaft that the gears attach to. Thanks.
Advert

4 May 2013 at 18:13 #12127
Nathan
Participant
@nathan
4 May 2013 at 19:41 #118431
Kris Lehane
Participant
@krislehane86422
4 and 7/8" . Plus 1 3/4" 'Tother end. Gear is 0.375". depends on where you knock the roll-pin in. Speak to myford. Better still.. !!! I have a metre/inches steel rule clamped backwards in the tool-holder, on mine, and I'll wind it back by my leadscrew in 1000's….. give or take a foot, And tell you what it should be. Ask an engineer! K. Slot of laser…..
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Richard Simmonds’ “How To Make A Weight Driven Clock”
  Started by: iacooper in: Clocks and Scientific Instruments
- 7
- 10
- 4 November 2026 at 19:49
  iacooper
- Most used ‘rubbish’ tool
  Started by: jaCK Hobson in: The Tea Room
- 6
- 7
- 4 November 2026 at 19:14
  Dave Halford
- BCA MK III Jig Borer
  Started by: pjh in: Help and Assistance! (Offered or Wanted)
- 6
- 6
- 4 November 2026 at 19:01
  Phil P
- Unusual dual speed pulley on motor
  Started by: gerry madden in: Manual machine tools
- 10
- 16
- 4 November 2026 at 17:57
  gerry madden
- WAR FINISH
  Started by: Speedy Builder5 in: The Tea Room
- 10
- 11
- 4 November 2026 at 17:56
  JA
- What Did You Do Today 2026 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 56
- 247
- 4 November 2026 at 17:50
  Nigel Graham 2
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 11
- 14
- 4 November 2026 at 17:36
  old mart
- Shape of Boxford fixed steady blocks
  Started by: Grindstone Cowboy in: Beginners questions
- 2
- 2
- 4 November 2026 at 17:27
  old mart
- help please in identifying
  Started by: John Holloway in: General Questions
- 4
- 9
- 4 November 2026 at 16:43
  renardiere7
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 10
- 11
- 4 November 2026 at 15:26
  Peter Cook 6
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 3
- 6
- 4 November 2026 at 15:07
  BOB BLACKSHAW 1
- Unimat 3 baseplate
  Started by: mart7mcfl7 in: Manual machine tools
- 3
- 3
- 4 November 2026 at 14:00
  JasonB
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 6
- 4 November 2026 at 12:09
  Bo’sun
- Mini ER11 milling/drilling unit
  Started by: YouraT in: Manual machine tools
- 5
- 9
- 4 November 2026 at 12:05
  bernard towers
- Lathe improvements? 1 2 … 5 6
  Started by: Niels Abildgaard in: Manual machine tools
- 24
- 130
- 4 November 2026 at 09:14
  Niels Abildgaard
- What aluminium sizes do you regularly use in your workshop?
  Started by: aytact in: Manual machine tools
- 6
- 6
- 4 November 2026 at 09:11
  AStroud
- Stronger Filament 1 2
  Started by: BOB BLACKSHAW 1 in: 3D Printers and 3D Printing
- 12
- 41
- 4 November 2026 at 07:23
  BOB BLACKSHAW 1
- SOLIDWORKS for MAKERS
  Started by: Paul Lousick in: CAD – Technical drawing & design
- 2
- 2
- 4 November 2026 at 07:00
  JasonB
- ML10 Dewhurst / Brook Crompton 1 2
  Started by: starjump in: Beginners questions
- 11
- 26
- 4 November 2026 at 00:07
  southernchap
- SolidCraft Features.
  Started by: blowlamp in: CAD – Technical drawing & design
- 5
- 9
- 3 November 2026 at 19:39
  Andy Stopford
- Torquay Manor 5 Gauge Frames
  Started by: Roy Birch in: Locomotives
- 6
- 8
- 3 November 2026 at 16:20
  Roy Birch
- Strange Clarkson Autolock Collet
  Started by: JohnF in: Workshop Tools and Tooling
- 12
- 16
- 3 November 2026 at 15:49
  Macolm
- 127t Gear With ⅞” Shaft and Keyway – Which Lathe?
  Started by: Captain Barnacles in: Workshop Tools and Tooling
- 15
- 23
- 3 November 2026 at 14:15
  Michael Gilligan
- Hemholtz coil positioning
  Started by: John Purdy in: Clocks and Scientific Instruments
- 4
- 21
- 3 November 2026 at 01:01
  peter1972
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 663
- 2 November 2026 at 19:25
  Turbine Guy

Myford ML7 leadscrew

Myford ML7 leadscrew

Latest Replies

Latest Issue

November 2026

Newsletter Sign-up

Latest Replies