looking info

looking info

This topic has 4 replies, 3 voices, and was last updated 3 April 2013 at 21:05 by ian campbell 2.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
1 April 2013 at 18:47 #115820
ian campbell 2
Participant
@iancampbell2
i have just purchased a edwards radial arm drill and was looking to know if anyone out there would have some literature or even a digital copy of a user manual

ian
Advert

1 April 2013 at 18:47 #12106
ian campbell 2
Participant
@iancampbell2
edwards drill
3 April 2013 at 13:50 #115968
Brian Wood
Participant
@brianwood45127
Hello Ian,

Tony Griffith's website http://www.lathes.co.uk has information on machine tools of all sorts, not just lathes. He can also supply manuals.

Well worth exploring

Regards Brian
3 April 2013 at 15:40 #115979
Springbok
Participant
@springbok
You could try these

http://www.rondean.co.uk/wp-content/uploads/2010/09/manuals.pdf
They seem to have lots of manuals

Bob
3 April 2013 at 21:05 #116003
ian campbell 2
Participant
@iancampbell2
Thanks guys have already tried lathes.co.UK but only Edwards machine I could find listed was guillotines. Will look through the other site now.

Ian
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Survival Challenge TV for engineers!
  Started by: Neil Wyatt in: The Tea Room
- 14
- 24
- 27 August 2026 at 15:31
  southernchap
- Chronos closing down. 1 2 3 4
  Started by: Andrew Tinsley in: General Questions
- 35
- 81
- 27 August 2026 at 15:23
  southernchap
- Photography in the workshop (for the inept)
  Started by: Pippin in: Workshop Techniques
- 15
- 20
- 27 August 2026 at 15:07
  southernchap
- How do I ream a 15mm hole on a Unimat 3 ?
  Started by: paul1956 in: Beginners questions
- 6
- 12
- 27 August 2026 at 14:42
  Michael Gilligan
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 14
- 23
- 27 August 2026 at 13:57
  Ian Hewson
- What is the easiest thin steel sheet to bend without cracking?
  Started by: elowen01 in: Materials
- 5
- 5
- 27 August 2026 at 12:02
  Nicholas Farr
- Reconstruction of dimensions fom a photo…
  Started by: Robin Graham in: Beginners questions
- 8
- 15
- 27 August 2026 at 10:39
  JasonB
- I built another one …
  Started by: Mick B1 in: Work In Progress and completed items
- 3
- 3
- 27 August 2026 at 09:26
  Bo’sun
- When is a threaded insert preferable to tapping directly into aluminum?
  Started by: elowen01 in: General Questions
- 16
- 20
- 27 August 2026 at 02:59
  elowen01
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 54
- 27 August 2026 at 00:36
  David Frith
- Cutting 25 thou grooves for a couple of circlips
  Started by: Andrew Tinsley in: General Questions
- 9
- 20
- 26 August 2026 at 21:17
  Andrew Tinsley
- Taper turning attachment
  Started by: Bernard Reilly in: Workshop Tools and Tooling
- 6
- 8
- 26 August 2026 at 20:56
  Clive Foster
- Toolroom Takeover 2026
  Started by: Pippin in: The Tea Room
- 2
- 2
- 26 August 2026 at 20:40
  Michael Gilligan
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 3
- 4
- 26 August 2026 at 19:32
  Mick B1
- Ketan Swali 1 2 3
  Started by: Bill Davies 2 in: The Tea Room
- 44
- 51
- 26 August 2026 at 18:55
  Bill Dawes
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 3
- 7
- 26 August 2026 at 16:44
  JasonB
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 21
- 26 August 2026 at 16:10
  Derek Drover
- Scam response to advert
  Started by: Lee Rogers in: The Tea Room
- 2
- 2
- 26 August 2026 at 16:04
  Derek Drover
- Parting off 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 19
- 42
- 26 August 2026 at 12:50
  Howard Lewis
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 30
- 97
- 26 August 2026 at 10:47
  bernard towers
- Drill grinders/sharpeners and their capabilities
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 9
- 20
- 26 August 2026 at 09:32
  Pippin
- Nameplate Identification
  Started by: onarion67 in: Workshop Techniques
- 4
- 8
- 25 August 2026 at 19:07
  Martin Johnson 1
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 6
- 11
- 25 August 2026 at 17:15
  Speedy Builder5
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 1
- 1
- 25 August 2026 at 09:49
  Mick Bailey
- Myford Lathe Identification
  Started by: Captain Barnacles in: Manual machine tools
- 8
- 14
- 25 August 2026 at 08:40
  Howard Lewis

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies