Little things that make you smile

[pgk pgkParticipant @pgkpgk17461]

I had need to position an accurate hole on some rectangular plate to bore it out on the lathe. So I knocked up one of those quick thingies to go between tap guide and stock.. you know the thing.. a point one end and a divot the other and use a DTI to adjust the chuck. I happened to dig out a piece of broken feathering shaft from my heli broken bits box to make it.

It raised a smile when i took it out of the lathe and spotted the lasered logo 'Align'

pgk

[pgk pgkParticipant @pgkpgk17461]

Alignment tool

[larry phelan 1Participant @larryphelan1]

These things happen !!

[Author]

Posts