Large Ends Mills – Surplus.

[Richard BParticipant @richardb44403]

I have been given some engineering bits and pieces and included are 4 no rather large end mills – rather too big for my Cowells !!!

Maybe too big for most on the forum but I know some have access to large industrial machines. Free to good home (not resale)

1. 1 1/2" dia 6 tooth, 1" shank, Halls and Pickles make, marked M42 Lead 8.572

2. 1" dia, 6 tooth (ground to about 24.1mm approx) 1" shank Osborn

3. Rougher 5 tooth reads 22mm but measures under 25mm shank Clarkson.

4.Rougher 5 tooth approx 20mm marked 7/8" osborn 1" shank.

All in good condition and sharp.

If any use please advise – a charity/Hospice donation of your choice appreciated.

[Richard BParticipant @richardb44403]

[Henry BrownParticipant @henrybrown95529]

I may be inrterested Richard, where are you please?

[Charles JambonParticipant @charlesjambon]

Dear Richard,

I am interested and will give £20 to St Leonard's Hospice in York and pay your postage to York (assuming you are in the UK).

[Richard BParticipant @richardb44403]

I'm in Clevedon, North Somerset.

Pick up would be great but I can post.

No use to me and they need to be used !

PM me and hopefully can sort.

[Author]

Posts