Identifying carbide tips

Identifying carbide tips

This topic has 6 replies, 6 voices, and was last updated 11 April 2020 at 20:45 by old mart.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
11 April 2020 at 17:39 #19702
Brian Oldford
Participant
@brianoldford70365
Advert

11 April 2020 at 17:39 #464030
Brian Oldford
Participant
@brianoldford70365
Can anyone point me to a on-line resource to help me identify the code of some carbide tips I have please.
11 April 2020 at 17:53 #464035
Emgee
Participant
@emgee
Start here then Google will help

**LINK**

Emgee
11 April 2020 at 18:01 #464041
Neil Wyatt
Moderator
@neilwyatt
'Carbide tip identification' in google throws up a lot of guides.

It's easiest to type the codes direct into google.

Neil
11 April 2020 at 18:17 #464047
jimmy b
Participant
@jimmyb
here is a good online resource

Jim
11 April 2020 at 20:20 #464068
Hollowpoint
Participant
@hollowpoint
If you post a picture with a few dimensions I might be able to tell you. I have developed a bit of a knack for identifying them after acquiring about a 1000 of them. 😮
11 April 2020 at 20:45 #464077
old mart
Participant
@oldmart
The Carbide Depot site as recommended by Jimmy is very good, there is a link there to technical resources insert designation chart.
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- UK Steel Supplier? 125 x 125 x 50 BMS
  Started by: idriver in: General Questions
- 12
- 22
- 4 August 2025 at 22:24
  John Haine
- Will iron rivets expand to fill oversized hole?
  Started by: Arthur Jones 2 in: Locomotives
- 1
- 1
- 4 August 2025 at 22:21
  Arthur Jones 2
- Bandsaw vs Powered Hacksaw vs Chop Saw?
  Started by: idriver in: General Questions
- 11
- 11
- 4 August 2025 at 22:09
  Diogenes
- How many rings per piston? 1 2
  Started by: Arthur Jones 2 in: Locomotives
- 14
- 39
- 4 August 2025 at 22:01
  Arthur Jones 2
- Ultra Newcomer Lathe Setup Query
  Started by: Brahma in: Beginners questions
- 6
- 15
- 4 August 2025 at 20:57
  Brahma
- Meek style dog-clutch for a Colchester
  Started by: Taris Jewell in: Manual machine tools
- 7
- 13
- 4 August 2025 at 19:51
  Taris Jewell
- Chuck- Lathe yet another type.
  Started by: Speedy Builder5 in: Workshop Tools and Tooling
- 9
- 9
- 4 August 2025 at 19:38
  Pete
- Pratt Bernard Grip true issues
  Started by: teamricky in: Workshop Tools and Tooling
- 3
- 3
- 4 August 2025 at 17:14
  bernard towers
- semiconductor help mosfets?
  Started by: Ian Parkin in: Electronics in the Workshop
- 2
- 3
- 4 August 2025 at 17:13
  Robert Atkinson 2
- Smart Meter Change-over Problems
  Started by: Alistair Robertson 1 in: The Tea Room
- 4
- 4
- 4 August 2025 at 15:57
  old mart
- Thread restorers
  Started by: old fool in: The Tea Room
- 9
- 11
- 4 August 2025 at 15:28
  old mart
- Seig SX3.5ZP
  Started by: IanT in: Manual machine tools
- 8
- 19
- 4 August 2025 at 15:16
  old mart
- Depth of cut cowells me90 1 2
  Started by: kinross1 in: Manual machine tools
- 10
- 28
- 4 August 2025 at 15:11
  Roger Woollett
- MD65 leadscrew cross-slide stuck in nut
  Started by: leov in: Manual machine tools
- 5
- 10
- 4 August 2025 at 14:51
  old mart
- Alternatives for a DRO display change
  Started by: John Hinkley in: General Questions
- 4
- 9
- 4 August 2025 at 14:35
  John Hinkley
- Help recommend a milling machine?
  Started by: richard1989 in: Beginners questions
- 19
- 25
- 4 August 2025 at 14:25
  old mart
- MIG Welder Won’t Weld
  Started by: Martyn Nutland 1 in: Workshop Techniques
- 13
- 15
- 4 August 2025 at 14:06
  Nigel Graham 2
- drafting
  Started by: Peter Dickson in: Locomotives
- 4
- 8
- 4 August 2025 at 13:58
  Anthony Stockman 1
- Hi I’m a newcomer
  Started by: brumfan1991 in: Introduce Yourself – New members start here!
- 3
- 6
- 4 August 2025 at 13:20
  Howard Lewis
- New member – mid 50s Zyto Lathe
  Started by: peterrivers in: Introduce Yourself – New members start here!
- 3
- 4
- 4 August 2025 at 13:04
  Howard Lewis
- Mary beam engine
  Started by: richard davis 2 in: Beginners questions
- 8
- 13
- 4 August 2025 at 12:31
  richard davis 2
- Precedent Perkasa MTB plans
  Started by: jamesrot in: General Questions
- 1
- 1
- 4 August 2025 at 10:40
  jamesrot
- Cutting thin slots in 12mm mild steel
  Started by: Peter Simpson 3 in: Beginners questions
- 10
- 13
- 4 August 2025 at 10:10
  Robin
- Why am I confused?
  Started by: JimmieS in: The Tea Room
- 7
- 9
- 3 August 2025 at 21:55
  Harry Wilkes
- Beginner with newly bought lathe – many questions 1 2
  Started by: ell81 in: Beginners questions
- 16
- 26
- 3 August 2025 at 20:17
  peterrivers

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies