The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Materials › Graphite yarn
Hi
Can anyone give me a UK supplier of graphite or PTFE packing yarn.
Cheers Mike
Gland packing
Try Reeves 2000, Blackgates or Polly Engineering.
Neil
Blackgates used to do graphite yarn Mike – and for PTFE "packing" yarn just use PTFE plumbers tape and twist it into "strings" if you see what I mean.
Regards,
IanT
Cheers guys.
check a previous posting of mine, what is being passed off as graphite yarn has no graphite!
Perhaps surprisingly … Putting the words 'fizzy yarn' into the Google search box on the home-page does actually find this previous thread.
MichaelG.
You could try Stuart Models, I think they do it.
I wasnt making it up govnor, honest I wasnt
.
It was the ability to easily find the relevant that caused my mild surprise
… Never doubted you for a moment.
Home › Forums › Materials › Topics
Started by: Michael Gilligan in: Workshop Tools and Tooling
Michael Gilligan
Started by: Graeme Seed in: Workshop Tools and Tooling
Pete
Started by: mart7mcfl7 in: Manual machine tools
mart7mcfl7
Started by: Richard B in: Traction engines
Richard B
Started by: Dominic Bramley in: Traction engines
Started by: Bo’sun in: Workshop Tools and Tooling
Started by: Paul Lousick in: CAD – Technical drawing & design
Paul Lousick
Started by: Grindstone Cowboy in: Beginners questions
Grindstone Cowboy
Started by: Captain Barnacles in: Workshop Tools and Tooling
Captain Barnacles
Started by: iacooper in: Clocks and Scientific Instruments
iacooper
Started by: jaCK Hobson in: The Tea Room
Dave Halford
Started by: pjh in: Help and Assistance! (Offered or Wanted)
Phil P
Started by: gerry madden in: Manual machine tools
gerry madden
Started by: Speedy Builder5 in: The Tea Room
JA
Started by: JasonB in: The Tea Room
Nigel Graham 2
Started by: John Holloway in: General Questions
renardiere7
Started by: Clive Farrar in: General Questions
Peter Cook 6
Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
BOB BLACKSHAW 1
Started by: YouraT in: Manual machine tools
bernard towers
Started by: Niels Abildgaard in: Manual machine tools
Niels Abildgaard
Started by: aytact in: Manual machine tools
AStroud
Started by: BOB BLACKSHAW 1 in: 3D Printers and 3D Printing
Started by: starjump in: Beginners questions
southernchap
Started by: blowlamp in: CAD – Technical drawing & design
Andy Stopford
Started by: Roy Birch in: Locomotives
Roy Birch
View full reply list.