Good Afternoon

[colin wilkinsonParticipant @colinwilkinson75381]

Hello Gentlemen, ( apologies to any Lady readers ), As a total newby to machining I have no doubt I will be on asking questions after I have made mistakes. My main obsession is motorcycles, specifically older race bikes, so not all parts are readily available hence the need to make "stuff". Colin Wilkinson

[colin wilkinsonParticipant @colinwilkinson75381]

[colin wilkinsonParticipant @colinwilkinson75381]

Should have said, I have a small lathe for making spacers etc, now I want a small milling machine to keep it company and make more expensive swarf. Thanks in anticipation, Colin Wilkinson

Edited By Neil Wyatt on 17/11/2017 14:55:03

[David George 1Participant @davidgeorge1]

Welcome to the forum if you need any help just ask. Where are you based. I worked for Dresda Motorcycles quite a few years ago and worked on quite a few racing bikes.

David

[Brian HParticipant @brianh50089]

Hello Colin and welcome, there are a number of bikers on here so you will be in good company.

Ask away with your questions, there is bound to be someone on here who can answer them

Brian

[Chris Evans 6Participant @chrisevans6]

Welcome from another motorcyclist who has to make "Stuff"

[colin wilkinsonParticipant @colinwilkinson75381]

David, I am based in Cheshire close to M6/M56 junction. Ah, Dave Degens- now there's a name from the past. Raced against him at Oulton Park many, many years ago. Colin

[Author]

Posts