Does any one know what make this lathe is

[AjohnwParticipant @ajohnw51620]

[AjohnwParticipant @ajohnw51620]

Interesting micro lathe just sold on ebay. Not one I have seen before

**LINK**

It went out of the price range I would pay before the auction ended but I had a feeling some one would bid right at the end – they did.

John

–

[Gray62Participant @gray62]

Looks very much like a Taig/Peatol type

[AjohnwParticipant @ajohnw51620]

I wondered about that. I know that Taig or Peatol did make something other than the current one. I went to a model engineering exhibition ?? years ago and some one was berating Peatol for spoiling the lathe and cheapifying it. This one does look entirely sensible.

John

–

[Roderick JenkinsParticipant @roderickjenkins93242]

Pretty certain it's a Sherline **LINK**

Rod

[Neil WyattModerator @neilwyatt]

Ebay links to finished items don't work any more ..

Neil

[AjohnwParticipant @ajohnw51620]

Thanks Rod. Never thought of that. Probably influenced by an older Peatol – if such a thing exists. I have always wondered despite the earlier comment.

John

–

[Michael GilliganParticipant @michaelgilligan61133]

Posted by Neil Wyatt on 24/07/2015 13:09:06:

Ebay links to finished items don't work any more ..

Neil

.

It worked for me, just now, Neil

Did you scroll down the page ?

MichaelG.

[Michael GilliganParticipant @michaelgilligan61133]

< double post >

Edited By Michael Gilligan on 24/07/2015 13:54:07

[RobboParticipant @robbo]

Posted by Neil Wyatt on 24/07/2015 13:09:06:

Ebay links to finished items don't work any more ..

Neil

oh yes they do!

[Ian S CParticipant @iansc]

That's a Sherline, mates got one, his was I think made in Australia. I haven't tried it, but for it's size looks quite a good little machine.

Ian S C

[Russell EberhardtParticipant @russelleberhardt48058]

I hope whoever bought it refits the mains plug properly

Russell.

[Neil WyattModerator @neilwyatt]

Posted by Robbo on 24/07/2015 13:52:35:

Posted by Neil Wyatt on 24/07/2015 13:09:06:

Ebay links to finished items don't work any more ..

Neil

oh yes they do!

That is weird.

A hour ago I got a list of 'alternative items' – basically several 5" lathes.

Now I see the original listing with 'bidding has ended' but the images are 'unavailable'.

Maybe it depends if I'm signed in or not?

Neil

[AjohnwParticipant @ajohnw51620]

I just clicked on the link Neil using a browser that has never been logged into Ebay. Still works for me including the images.

Then tried from a browser that is logged into ebay. Same result except had to click see original listing.

Looking at it the tailstock is split. That has been updated to one which closes onto the dovetail bed in the more normal way so suspect it's an early one. Looking at what Sherline say about the over all accuracy of the machine it doesn't seem to be as good as would be expected on a small lathe of this size.

John

–

[AjohnwParticipant @ajohnw51620]

I wish I had space for this one. It's bound to need a thorough restore.

**LINK**

The shipping charges seem to be remarkably low.

I have used a lathe of that sort of age. It was at the back of what was called box bench where I was trained. It had been there for as long as the building had and scarcely ever used. The finish was amazing and the sounds of the flat belts running was pretty good too. There is something sexy about the noise of the joints going over the pulleys.

Box Bench – well it started with a 4in cube of steel and a hand file. It finishes up as a just under a 2in perfect cube. Later we made our tool makers chest out of sheet steel. Hence box bench.

John

–

[Roger Provins 2Participant @rogerprovins2]

Posted by John W1 on 24/07/2015 17:22:20:

I wish I had space for this one. It's bound to need a thorough restore.

**LINK**

The shipping charges seem to be remarkably low.

………..

John

–

"The machine is for collection only, and must be removed within two weeks of purchase. "

[V8EngParticipant @v8eng]

Posted by Roger Provins 2 on 24/07/2015 18:40:38:

Posted by John W1 on 24/07/2015 17:22:20:

I wish I had space for this one. It's bound to need a thorough restore.

**LINK**

………..

John.

That lovely machine would grace any workshop, it's truly a thing of beauty.

[Neil WyattModerator @neilwyatt]

Works now… ?

Not the first time I've seen this with expired ebay pages. I wonder what causes it.

Ho hum!

Neil

[AjohnwParticipant @ajohnw51620]

If any one bought I suspect they would have to pray that it had replaceable bronze bearings.

I could be tempted but I just haven't got the space.

John

–

[V8EngParticipant @v8eng]

Posted by John W1 on 24/07/2015 20:53:45:

If any one bought I suspect they would have to pray that it had replaceable bronze bearings.

I could be tempted but I just haven't got the space.

John

–

I might be tempted to put it somewhere to gaze at in admiration.

I don't have the space either (or spare cash), and know the wife would not allow it to stand in our living room.

[Graham Green 3Participant @grahamgreen3]

It's an early Australian made Sherline, before the rights to the lathe was sold to Joe Martin, have a good look at the headstock and you can see where the Sherline 'stick on sticker' has come adrift.

[Author]

Posts