conway saddle tank

[John BradyParticipant @johnbrady48131]

radius of bends

[John BradyParticipant @johnbrady48131]

 

  Please can anyone tell me the radius of the bends in the saddle tank for conway thanks in anticipation

                                                           jb

[Sean CaveParticipant @seancave62792]

Hi John,

 

In reply to your query, the inside radius is 2 1/8″, to fit closely to the boiler cleading. The lower outside bend is 1/2″ radius, the upper outside bend is 1 1/4″ radius and the curve over the top is 5 3/4″.

 

Hope this is useful,

 

Regards,

 

Sean Cave.

[Author]

Posts