Colchester Bantam Mk2 1600

This topic has 2 replies, 2 voices, and was last updated 10 April 2023 at 19:40 by Thor 🇳🇴.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
10 April 2023 at 13:57 #34202
Colin Simpson
Participant
@colinsimpson18335
Cross Slide Feed Wheel
Advert

10 April 2023 at 13:57 #640790
Colin Simpson
Participant
@colinsimpson18335
Hi

Please could anyone help, I’m in the process of stripping down a Mk2 Bantam, but are unable to remove the cross-feed hand wheel. I have the Colchester manual, but the wheel seems to held in in place with an internal circlip (not as shown in the Mk 2 Manual&nbsp ??
10 April 2023 at 19:40 #640839
Thor 🇳🇴
Participant
@thor
Hi Colin,

Welcome to the forum. May be a photo of the problem would help. How to post photos here.

Thor
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Axminster Granite Surface Plate – Delamination of surface coating
  Started by: Greensands in: Workshop Tools and Tooling
- 7
- 7
- 11 June 2026 at 14:55
  Colin Heseltine
- international exhibition 1862
  Started by: duncan webster 1 in: The Tea Room
- 6
- 9
- 11 June 2026 at 14:04
  duncan webster 1
- Taylor Hobson Pantograph Engraver Model D
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 8
- 25
- 11 June 2026 at 13:59
  jaCK Hobson
- Running 380V 3-phase motor on 230V 1-phase
  Started by: jimalm in: Electronics in the Workshop
- 9
- 13
- 11 June 2026 at 12:56
  Robert Atkinson 2
- An extraordinary lathe bargain?
  Started by: Robin Graham in: The Tea Room
- 12
- 18
- 11 June 2026 at 12:44
  Howard Lewis
- My adventures with a bench top CNC mill 1 2 3
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 7
- 56
- 11 June 2026 at 11:48
  John Hinkley
- Chester Machine Tools Hobby Open Week
  Started by: Neil Wyatt in: Exhibitions, Shows and Club Events
- 1
- 1
- 11 June 2026 at 11:19
  Neil Wyatt
- Myford VMC Spindle Advice Please.
  Started by: Nigel Graham 2 in: Manual machine tools
- 9
- 25
- 11 June 2026 at 10:10
  Bazyle
- Noggin End Metals?
  Started by: anonymouse in: Materials
- 3
- 3
- 11 June 2026 at 08:21
  colin brannigan
- Fusion CAD / CAM Problem
  Started by: Shaun Churchill in: CAD – Technical drawing & design
- 4
- 6
- 10 June 2026 at 19:18
  Alan Wood 4
- Lightning 1 2
  Started by: duncan webster 1 in: Electronics in the Workshop
- 12
- 38
- 10 June 2026 at 17:57
  Macolm
- Gauge Glass Fitting
  Started by: Thomas Clarke in: General Questions
- 6
- 8
- 10 June 2026 at 11:45
  Dalboy
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 5
- 5
- 10 June 2026 at 09:10
  Bo’sun
- Another new member in France
  Started by: jimalm in: Introduce Yourself – New members start here!
- 6
- 6
- 9 June 2026 at 18:02
  Speedy Builder5
- PM,s
  Started by: Redpiperbob in: General Questions
- 3
- 6
- 9 June 2026 at 16:37
  peak4
- RS & J 4NHP in 2″ scale
  Started by: TREVOR WILSON in: Traction engines
- 2
- 2
- 9 June 2026 at 15:56
  Dave Halford
- Breaking gears in a Myford ML7
  Started by: drnewcomb in: Manual machine tools
- 14
- 21
- 9 June 2026 at 12:19
  Speedy Builder5
- Cheap digital spirit level accuracy 1 2
  Started by: Mick Bailey in: Workshop Tools and Tooling
- 18
- 44
- 9 June 2026 at 11:56
  Nicholas Farr
- Nickel Silver
  Started by: Carl in: Materials
- 10
- 13
- 8 June 2026 at 22:46
  old mart
- Steam wagon “Meg” advice, please.
  Started by: Mike Henderson 1 in: Traction engines
- 6
- 10
- 8 June 2026 at 22:19
  [email protected]
- S,O,D 1 2
  Started by: larry phelan 1 in: The Tea Room
- 27
- 30
- 8 June 2026 at 18:14
  Roderick Jenkins
- Improving a 30 taper fit
  Started by: Andrew Skinner in: Manual machine tools
- 11
- 18
- 8 June 2026 at 17:11
  bernard towers
- where to find locomotive / train plans ?
  Started by: zuji miko in: Beginners questions
- 5
- 7
- 8 June 2026 at 16:32
  JA
- 4 cylinder rotary valve
  Started by: AStroud in: Work In Progress and completed items
- 5
- 13
- 8 June 2026 at 16:15
  AStroud
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 112
- 8 June 2026 at 12:58
  renardiere7

Colchester Bantam Mk2 1600

Colchester Bantam Mk2 1600

Latest Replies

Latest Issue

May 2026

Newsletter Sign-up

Latest Replies