Clarke Cl250 Toolpost

[KrytenParticipant @kryten]

Hi all

Does anyone have a Clarke Cl250 lathe that they could take the measurements for the toolpost for me, height from face of cross slide, width and tool clamping dimns, Or recommend an off the shelf replacement.

Cheers

[KrytenParticipant @kryten]

[Ian MellorsParticipant @ianmellors72388]

Standard toolpost – distance from bottom to bottom edge of fixed tool slot is 29mm. The other side with the half moon cutout is approx 30mm to the centre of the top of the half moon with the half moon level

Hope this helps

[Author]

Posts