Brass casting – who to contact?

[Jon Harrison 3Participant @jonharrison3]

I need to have a fancy bit of Brass cast.

I do have a master which can be copied. Also have some 100 year old brass of the right colour.

Tried Owl castings but way too expensive for what I wanted.

Any suggestions as to who to contact?

[Jon Harrison 3Participant @jonharrison3]

[bernard towersParticipant @bernardtowers37738]

Try your local model engineering club ,they may have a contact. On the other hand you could ask Noel!!

[Jon Harrison 3Participant @jonharrison3]

My local club don't accept such jobs from non members.

Can't figure that one.

Noel?

[Brian HParticipant @brianh50089]

**LINK**

Brian (I have no connection with them)

[JasonBModerator @jasonb]

Madley did some non-ferrous from my patterns last year and they came out very well

[not done it yetParticipant @notdoneityet]

Location? It might help.

I have used a local foundry, close to Market Deeping, in the past.

[StueeeeParticipant @stueeee]

I've had Brass, Bronze, Iron and Ali castings done by these people. Always had good work from them. **LINK** Usual disclaimer, just a customer etc.

[Nick Clarke 3Participant @nickclarke3]

Manor Foundry Ilkeston Derbys. – Very helpful over the phone but the project was abandoned for other reasons so never actually used them.

**LINK**

[Jon Harrison 3Participant @jonharrison3]

North Yorkshire.

My casting needs are pretty small as in guards and could be done in a 2 part mould. A 4 part would be better and I hope retain any engraved detail.

[Nigel Graham 2Participant @nigelgraham2]

You could also try Bridport Foundry (named after its West Dorset home town), which handles the Stuart range among many other things.

[Brian lightfootParticipant @brianlightfoot39268]

Madeley brass Telford are very good. Done several jobs for me with excellent results.

[Boiler BriParticipant @boilerbri]

There is a small company in Bradford that does non ferrous casting – Monkman

Bri

[noel shelleyParticipant @noelshelley55608]

I have sent you a PM. Noel.

[Author]

Posts