Boiler Fittings

This topic has 4 replies, 2 voices, and was last updated 27 December 2013 at 17:47 by JasonB.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
27 December 2013 at 17:06 #138876
John Besley
Participant
@johnbesley21290
I am on the hunt for a inline regulator valve that I can fit an arm to for my Wilesco traction engine modification, this needs to take 1/8" pipework, where can I obtain one please.

All I can find are globe valves that are screw down with a hand wheel, not quite what I have in mind, I have a felling that there may be something that steam boat builders use but don't know who supplies these.
Advert

27 December 2013 at 17:06 #23039
John Besley
Participant
@johnbesley21290
27 December 2013 at 17:14 #138877
JasonB
Moderator
@jasonb
Polly do a steam stop valve that has an arm with holes in so it can easily be operated by an RC servo, see page 43
27 December 2013 at 17:43 #138881
John Besley
Participant
@johnbesley21290
Looks like it could solve the problem, any ideas what the dimensions are as nothing is shown.
27 December 2013 at 17:47 #138882
JasonB
Moderator
@jasonb
Afraid not, best give them a call or e-mail
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Jaxon Steam Car ride to the next 5 inch rail club
  Started by: Werner Schleidt in: Traction engines
- 4
- 5
- 6 July 2026 at 17:11
  Werner Schleidt
- When is a new 90 degree drill not 90 degrees?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 2
- 2
- 6 July 2026 at 17:06
  Diogenes
- Unwanted Car Software Update 1 2
  Started by: Chris Crew in: The Tea Room
- 19
- 29
- 6 July 2026 at 16:26
  Bill Phinn
- Hallo from Austria
  Started by: wilfried54 in: Introduce Yourself – New members start here!
- 3
- 4
- 6 July 2026 at 16:00
  peak4
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 5
- 5
- 6 July 2026 at 13:59
  bernard towers
- Valuatiion of severql models
  Started by: ron vale 3 in: Stationary engines
- 2
- 2
- 6 July 2026 at 13:56
  bernard towers
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 4
- 5
- 6 July 2026 at 13:28
  John Haine
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 28
- 69
- 6 July 2026 at 13:09
  alecs
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 12
- 14
- 6 July 2026 at 12:44
  Martin Johnson 1
- Hi there fellow engineers
  Started by: ray1580 in: Introduce Yourself – New members start here!
- 5
- 8
- 6 July 2026 at 11:45
  alecs
- Flat Surface 1 2 3
  Started by: COLIN MARTIN 2 in: Materials
- 32
- 61
- 6 July 2026 at 10:36
  alecs
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 60
- 6 July 2026 at 08:29
  alecs
- Accolade
  Started by: Bill Dawes in: General Questions
- 8
- 8
- 6 July 2026 at 00:18
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 119
- 6 July 2026 at 00:13
  Nigel Graham 2
- Laser centre finder 1 2
  Started by: Buffer in: General Questions
- 16
- 33
- 5 July 2026 at 21:54
  Vic
- Brass covered steel
  Started by: Dougie Swan in: General Questions
- 9
- 10
- 5 July 2026 at 20:43
  Dougie Swan
- Testing Single Point Thread Fitment 1 2
  Started by: berwick in: Beginners questions
- 17
- 30
- 5 July 2026 at 16:44
  Michael Gilligan
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 41
- 5 July 2026 at 15:45
  Nick Welburn
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 51
- 5 July 2026 at 13:22
  southernchap
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 8
- 18
- 5 July 2026 at 10:29
  John Haine
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 5
- 9
- 5 July 2026 at 10:06
  michael m
- Identifying the pitch of threading inserts
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 5
- 12
- 4 July 2026 at 20:19
  Bill Phinn
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 324
- 4 July 2026 at 16:46
  Phil Whitley
- NPT thread
  Started by: Bill Dawes in: General Questions
- 8
- 11
- 4 July 2026 at 15:46
  Dave Halford
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 26
- 4 July 2026 at 15:12
  SteveP

Boiler Fittings

Boiler Fittings

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies