Some of you might recall my posting a few years ago regarding a B-L A1 I had inherited in an unfinished state, and my initial desire to just restore as a static. Part of that was driven by some of the negativity that seems to surround this particular model, but thanks to the encouragement and help from some of the members on here (you know who you are) I decided to see if this venerable old girl could in fact be restored to steam.
I thought I’d provide an update, partly to try to connect with a couple of other members who were restoring the same model – I’d love to hear how you got on – and partly ‘just because’!
In short, after some sterling work on the original Smithies boiler, some excellent re-engineering of the chassis, a new tender body and some very necessary fine-tuning all over, I now have a locomotive that will pull up trees! She has run beautifully on a G3 track a couple of times (unfortunately sandwiched by a mechanical failure that resulted in a rather embarassing flare-up during her official steam test) and is ready for some over-winter improvements (she was quite poorly constructed initially, and A1 experts will spot some strange anomalies in the photo below) before painting and lining. She has even hauled a driver around a local track in a never-to-be-repeated experiment.
My thanks and gratitude to those who have supported and worked on this journey. My engineering skills are limited – but have improved a hundred-fold over the past few months – and the message to anyone else out there who is restoring one, or is reticent about what it might be capable of, is to crack on.
Meanwhile, if anyone has any of the obvious missing parts to hand, I’m all ears!
