Myford Lever Action Collet Chuck

This topic has 3 replies, 3 voices, and was last updated 22 May 2013 at 11:05 by Richard Brickwood.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
7 December 2009 at 08:01 #45954
John C
Participant
@johnc47954
Hello All,
I acquired a Myford Lever Action Collet Chuck which wouldn’t move! I managed to get it apart to find that the body key had been deformed out of its slot. I got this out and cleaned up and the chuck now seems to work. But – there was only one ball bearing in the sleeve, and that seems too small for the holes. Also, the sleeve will now slide out of the body if the chuck is held nose up.

So – how many ball bearings should there be, and what size? And how is the
chuck held together – if it is.
The chuck has two keyways in the body – is there a reason for this?
Thanks in advance for any info. Photos posted in case someone else is having
similar trouble!
John
Advert

7 December 2009 at 08:01 #4875
John C
Participant
@johnc47954
7 March 2010 at 13:41 #49486
Anthony Spencer 1
Participant
@anthonyspencer1
Hi John

I have just stripped my Myford Collet Chuck and there should be * ball bearing (one in each hole)
22 May 2013 at 11:05 #120427
Richard Brickwood
Participant
@richardbrickwood17062
I too have just acquired a Myford lever action collet chuck and it works OK BUT I am having difficulty getting it tight enough on 1/8' rod to hold it whilst cutting thread. The knurled closer has no hole (and is hardened so not easy to drill one) so can only assume it relies upon hand tightening: I've used a large wrench but am concerned about damaging the knurles. Any ideas anyone?

Richard Brickwood
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 26
- 82
- 25 July 2026 at 12:59
  Vic
- Garden water pump
  Started by: John MC in: The Tea Room
- 7
- 7
- 25 July 2026 at 12:58
  Speedy Builder5
- Deep drilling
  Started by: Speedy Builder5 in: Workshop Techniques
- 10
- 22
- 25 July 2026 at 12:56
  Speedy Builder5
- Is anyone interested in developping a new series of model engines? 1 2 3 4
  Started by: paulmichael1084 in: General Questions
- 20
- 84
- 25 July 2026 at 12:31
  paulmichael1084
- Hobbing a Brass or Aluminium Drive Pulley to Stop Belt Slippage
  Started by: Blue Heeler in: Hints And Tips for model engineers
- 5
- 7
- 25 July 2026 at 09:16
  Michael Gilligan
- Mysterious Morse Tapers
  Started by: Pippin in: Workshop Tools and Tooling
- 9
- 15
- 25 July 2026 at 09:03
  Pippin
- Buzz Ballz packaging “unrecyclable” in U.K.
  Started by: Michael Gilligan in: The Tea Room
- 1
- 1
- 25 July 2026 at 02:35
  Michael Gilligan
- REXON SS16A scroll saw
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 7
- 24 July 2026 at 22:32
  Michael Gilligan
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 9
- 24 July 2026 at 20:22
  bernard towers
- Doris Black 5 mech lubricator question.
  Started by: kevmol57 in: Workshop Techniques
- 4
- 10
- 24 July 2026 at 13:25
  kevmol57
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 71
- 24 July 2026 at 10:27
  KEITH BEAUMONT
- Long awaited FreeCAD version 1.1 released
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 3
- 8
- 24 July 2026 at 10:16
  Roger Woollett
- Nut screws washer and bolts – you know the old joke
  Started by: Kiwi Bloke in: General Questions
- 16
- 22
- 24 July 2026 at 08:55
  Gerard O’Toole
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 53
- 24 July 2026 at 08:18
  David Frith
- Chat GPTgoes rogue and launches cyber attack
  Started by: Robert Atkinson 2 in: The Tea Room
- 8
- 9
- 24 July 2026 at 07:29
  Adrian R2
- Workshop Heaven but must have cost a fortune.
  Started by: alan ord 2 in: Workshop Tools and Tooling
- 5
- 5
- 24 July 2026 at 02:19
  Bill Phinn
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 152
- 23 July 2026 at 21:50
  Nigel Graham 2
- Mitutoyo Metrology Handbook – Still Available From Mitutoyo UK
  Started by: southernchap in: Books
- 3
- 6
- 23 July 2026 at 21:46
  Robert Atkinson 2
- It’s A Compressor, Jim, But Not… 1 2
  Started by: Nigel Graham 2 in: General Questions
- 12
- 30
- 23 July 2026 at 21:17
  Nigel Graham 2
- Dart 7 1/4 Build
  Started by: Roy Birch in: Locomotives
- 1
- 1
- 23 July 2026 at 14:25
  Roy Birch
- Electronics EL714-C DRO Display
  Started by: houstonceng in: Workshop Tools and Tooling
- 2
- 3
- 23 July 2026 at 13:16
  houstonceng
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 14
- 23 July 2026 at 10:28
  noel shelley
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 13
- 22
- 23 July 2026 at 02:10
  Grindstone Cowboy
- Bridgeport Series 1 CNC 1 2 3 4
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 76
- 23 July 2026 at 00:47
  seemack
- Help needed: Custom turned steering rack plug (Derbyshire / DE4)
  Started by: darikde4 in: General Questions
- 3
- 3
- 22 July 2026 at 23:03
  paulmichael1084

Myford Lever Action Collet Chuck

Myford Lever Action Collet Chuck

Latest Replies

Latest Issue

August 2026

Newsletter Sign-up

Latest Replies