MEW Issue 178 Lathe Oiler Project

Advert

New Replies

Report Bug

Help/FAQs

MEW Issue 178 Lathe Oiler Project

This topic has 9 replies, 5 voices, and was last updated 8 November 2018 at 21:32 by John Proffitt.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
7 November 2018 at 04:12 #33304
John Proffitt
Participant
@johnproffitt14928
Advert

7 November 2018 at 04:12 #379541
John Proffitt
Participant
@johnproffitt14928
Hi All. Just wondering if someone with a stack of back issues slightly larger than my pile has a copy of MEW July 2011 (Issue 178) please? If so, there's an article on page 48 on constructing an oiler for the Myford lathe. I'd be very grateful for a scanned copy (via email) if that's possible.

Thanks and best regards, John
7 November 2018 at 12:35 #379585
Howard Lewis
Participant
@howardlewis46836
PM with your E mail address, and I'll send the pictures

Howard
7 November 2018 at 18:46 #379631
John Proffitt
Participant
@johnproffitt14928
Thanks very much Howard. My email address is XXXXXXXX@gmail.com

Cheers, John

Edited By Neil Wyatt on 07/11/2018 22:06:04
7 November 2018 at 22:08 #379671
Neil Wyatt
Moderator
@neilwyatt
Hi John,

We encourage members to avoid posting their email addresses on the open forum to prevent them getting spammed (I have some heavy duty spam protection for my mytimemedia address…)

Howard asked for a personal message (a 'pm' – use the 'message member' button under his post – any reply will appear as a flashing envelope on the right of the page).

I've cut and pasted your email and pm'd it to Howard and deleted it from your email.

Thanks

Neil
8 November 2018 at 02:01 #379696
Enough!
Participant
@enough
Posted by John Proffitt on 07/11/2018 04:12:17:

Hi All. Just wondering if someone with a stack of back issues slightly larger than my pile has a copy of MEW July 2011 (Issue 178) please? If so, there's an article on page 48 on constructing an oiler for the Myford lathe. I'd be very grateful for a scanned copy (via email) if that's possible.

It was based, if I recall on components supplied by Arc who might have copies or other information sheets.
8 November 2018 at 03:01 #379697
John Proffitt
Participant
@johnproffitt14928
Thanks for that info. I'll follow that up with Arc. Cheers, John
8 November 2018 at 06:47 #379700
Ketan Swali
Participant
@ketanswali79440
Unfortunately, I can’t recall that issue – project as I don’t have a copy to hand. The only one I can recall is the lubrication system articles which you can see in this link. Once you are on the linked page, click on the ‘More’ tab where you will see downloadable pdfs to Tony Jeffree’s articles on this from 2010.

Ketan at ARC

Edited By Ketan Swali on 08/11/2018 06:50:03
8 November 2018 at 16:41 #379783
Howard Lewis
Participant
@howardlewis46836
Neil,

Thanks for forwarding John's message. Have now sent him what he requested, so he may now contact Ketan for parts.

Howard
8 November 2018 at 21:32 #379849
John Proffitt
Participant
@johnproffitt14928
Thanks for the link Ketan. I can see the attraction of removing oil guns from my life for good! Howard has kindly sent me the plans from MEW 178, so I'll check that out first. Regards, John
Author

Posts