Bronze for cylinder

Bronze for cylinder

This topic has 5 replies, 4 voices, and was last updated 13 February 2016 at 11:30 by Bob Youldon.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
13 February 2016 at 11:05 #29573
Gerald Caswell
Participant
@geraldcaswell30890
Advert

13 February 2016 at 11:06 #225155
Gerald Caswell
Participant
@geraldcaswell30890
I need a bronze block 1 1/4"x1 1/4×1 3/4" can anybody tell me where I can get one as looking around I cannot see a section of this size offered.

Thank you Gerry
13 February 2016 at 11:08 #225156
Anonymous
You'll have to cut it down from a larger section or get it cut roughly to size from plate.

Andrew
13 February 2016 at 11:17 #225157
Weary
Participant
@weary
M-Machine sell Phosphor Bronze (PB 102) 1 1/4" square by the inch.

(Their next size up is 1 1/2 square).

Regards,

Phil
13 February 2016 at 11:19 #225159
Gerald Caswell
Participant
@geraldcaswell30890
Thank you very much Phil, knowing where to go is always the first step.
13 February 2016 at 11:30 #225163
Bob Youldon
Participant
@bobyouldon45599
Good morning Gerry,

For gunmetal. try College Engineering, or Macc Model Ltd.

Regards,

Bob
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Most used ‘rubbish’ tool
  Started by: jaCK Hobson in: The Tea Room
- 1
- 1
- 4 November 2026 at 15:32
  jaCK Hobson
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 10
- 11
- 4 November 2026 at 15:26
  Peter Cook 6
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 3
- 6
- 4 November 2026 at 15:07
  BOB BLACKSHAW 1
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 10
- 12
- 4 November 2026 at 14:58
  jaCK Hobson
- BCA MK III Jig Borer
  Started by: pjh in: Help and Assistance! (Offered or Wanted)
- 4
- 4
- 4 November 2026 at 14:46
  AStroud
- WAR FINISH
  Started by: Speedy Builder5 in: The Tea Room
- 9
- 9
- 4 November 2026 at 14:26
  JA
- Unimat 3 baseplate
  Started by: mart7mcfl7 in: Manual machine tools
- 3
- 3
- 4 November 2026 at 14:00
  JasonB
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 6
- 4 November 2026 at 12:09
  Bo’sun
- Mini ER11 milling/drilling unit
  Started by: YouraT in: Manual machine tools
- 5
- 9
- 4 November 2026 at 12:05
  bernard towers
- help please in identifying
  Started by: John Holloway in: General Questions
- 4
- 8
- 4 November 2026 at 09:59
  JasonB
- Lathe improvements? 1 2 … 5 6
  Started by: Niels Abildgaard in: Manual machine tools
- 24
- 130
- 4 November 2026 at 09:14
  Niels Abildgaard
- What aluminium sizes do you regularly use in your workshop?
  Started by: aytact in: Manual machine tools
- 6
- 6
- 4 November 2026 at 09:11
  AStroud
- What Did You Do Today 2026 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 56
- 246
- 4 November 2026 at 08:51
  Andrew Crow
- Stronger Filament 1 2
  Started by: BOB BLACKSHAW 1 in: 3D Printers and 3D Printing
- 12
- 41
- 4 November 2026 at 07:23
  BOB BLACKSHAW 1
- SOLIDWORKS for MAKERS
  Started by: Paul Lousick in: CAD – Technical drawing & design
- 2
- 2
- 4 November 2026 at 07:00
  JasonB
- ML10 Dewhurst / Brook Crompton 1 2
  Started by: starjump in: Beginners questions
- 11
- 26
- 4 November 2026 at 00:07
  southernchap
- Unusual dual speed pulley on motor
  Started by: gerry madden in: Manual machine tools
- 10
- 15
- 3 November 2026 at 21:47
  Macolm
- SolidCraft Features.
  Started by: blowlamp in: CAD – Technical drawing & design
- 5
- 9
- 3 November 2026 at 19:39
  Andy Stopford
- Richard Simmonds’ “How To Make A Weight Driven Clock”
  Started by: iacooper in: Clocks and Scientific Instruments
- 6
- 7
- 3 November 2026 at 18:51
  iacooper
- Torquay Manor 5 Gauge Frames
  Started by: Roy Birch in: Locomotives
- 6
- 8
- 3 November 2026 at 16:20
  Roy Birch
- Strange Clarkson Autolock Collet
  Started by: JohnF in: Workshop Tools and Tooling
- 12
- 16
- 3 November 2026 at 15:49
  Macolm
- 127t Gear With ⅞” Shaft and Keyway – Which Lathe?
  Started by: Captain Barnacles in: Workshop Tools and Tooling
- 15
- 23
- 3 November 2026 at 14:15
  Michael Gilligan
- Hemholtz coil positioning
  Started by: John Purdy in: Clocks and Scientific Instruments
- 4
- 21
- 3 November 2026 at 01:01
  peter1972
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 663
- 2 November 2026 at 19:25
  Turbine Guy
- M7 Screws
  Started by: Vic in: Workshop Tools and Tooling
- 13
- 17
- 2 November 2026 at 18:34
  Georgineer

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

November 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies