What do these things do?

This topic has 6 replies, 5 voices, and was last updated 17 November 2013 at 20:07 by Cyril Bonnett.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
16 November 2013 at 17:46 #135715
Rik Shaw
Participant
@rikshaw
Having been out of touch with modern engineering techniques and tooling for a good number of years now I am frequently coming up against stuff I have no knowledge of.

A good example is shown in the pics. I bought nine of these solid carbide drill/reamers of various sizes from the car boot for a few quid. All are brand new and the one shown is the largest at 8mm diameter. I have never seen anything like these cutters so I seek enlightenment.
They are made by UK company Lomas and as far as I can make out are for use on exotic abrasive aircraft plastics – am I right? If they are unable to machine steel or brass they will not be a lot of use to me and may as well be moved on.

Is there a particular reason why the shanks are so long? The one pictured is 150mm long and its part no. is ST1257B-3125-60-1. It is described as ""VHM drill reamer". What is VHM?
Rik
Advert

16 November 2013 at 17:46 #22957
Rik Shaw
Participant
@rikshaw
Stuff thats to clever for me!
16 November 2013 at 18:21 #135718
Michael Gilligan
Participant
@michaelgilligan61133
Rik,

I would guess that VHM = Very Hard Metal

Whatever … that's a lot of useful-looking Carbide !!

MichaelG.
16 November 2013 at 18:38 #135722
Sub Mandrel
Participant
@submandrel
GIYF

That number brings up a few results, including this page. One is for a different tool tech reamer which re-googled brings up an ebay seller who doesn't know what these are and a few links that suggest they are 'drill reamers'. I suggest spinning one up and pushing it into a small pilot hole and seeing what happens!

Assuming you survive the experiment, please report back to us!

Neil
16 November 2013 at 18:49 #135727
JasonB
Moderator
@jasonb
Looks like they are the one shot drill/reamers designed for composites like glass & carbon reinforced plastics. The tapered drill end is probably less likely to snatch and lift the layers of reinforcement.

**LINK**
17 November 2013 at 16:43 #135817
Rik Shaw
Participant
@rikshaw
Update to original post.

Neil, at risk to life and limb I pushed one of these through a piece of 1/4" steel plate (no pilot hole) and it was like cutting butter. Following this barbaric treatment I had a quick peak at the cutting edges under the microscope. There was no sign of any damage.

By the way, I know the pics show that the tools have a gold coating — it's my light bulb that does that, they are the usual dark grey of carbide.

I have twigged that the "3125" bit of the part number is the diameter in 'thou's of the reamer ie .3125" . The others are .166" and .201" all seemingly non standard but maybe not so in the aircraft industry.

BAE might not buy their tooling on eb*y but if they do……………

Rik
17 November 2013 at 20:07 #135835
Cyril Bonnett
Participant
@cyrilbonnett24790
**LINK**

This link might give you some ideas
Author

Posts