Britannia Lathes.

Advert

New Replies

Report Bug

Help/FAQs

Britannia Lathes.

This topic has 11 replies, 4 voices, and was last updated 1 May 2015 at 10:38 by Ralph H.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
30 April 2015 at 07:56 #188164
Ralph H
Participant
@ralphh
I would like to know if anyone on this forum has experience of using lathes manufactured by the Britannia Company in Colchester around the turn of the last century. Were they well made? Would they still perform well today in the context of accuracy? Did their operation differ in any way to other conventional machines? Any comments regarding them would be greatly received.
Advert

30 April 2015 at 07:56 #12473
Ralph H
Participant
@ralphh
30 April 2015 at 08:15 #188168
martin perman 1
Participant
@martinperman1
My brother has our grandfathers Britannia treddle lathe and I used it for a while and it did what I wanted it to do, our grandfather built his steam engines on it with no trouble and never had an electric motor on it until he died and his grandsons fitted one.

Martin P
30 April 2015 at 13:53 #188201
Ralph H
Participant
@ralphh
Thank you, I'll infer from that it was a pretty good machine and capable of working to some degree of accuracy. What size is it, out of interest
30 April 2015 at 15:01 #188209
Ady1
Participant
@ady1
5-10 years ago there were tons of them on ebay, presumably as older guys gave up or passed on

It seemed like no two were ever alike and most were of a simple basic layout

Loads of them had that u-bend type gap bed and were solid looking lumps of cast iron

Tonys place has a page and there's a book

Colonialism, the Empire and WW1 probably had a big influence on the firms outputs which lasted until the 1930s

They never caught the imagination for some reason, unlike many other brands

Edited By Ady1 on 30/04/2015 15:16:49
30 April 2015 at 15:20 #188210
Ralph H
Participant
@ralphh
Yes his page is quite interesting but is unfortaunely incomplete due, we assume, to the limits of his source material. I am considering buying a book very similar to that. There does seem to be a lot of variation in design but the finish quality on many looks very good. It isnt very obvious if they have hollow spindles although their steadies are of a rather nice if basic design
30 April 2015 at 16:22 #188213
martin perman 1
Participant
@martinperman1
Ralph,

The bed of ours is 3' 6" to 4' long, the chuck stands at about waist height.

Martiin P
30 April 2015 at 16:22 #188214
martin perman 1
Participant
@martinperman1
Ralph,

The bed of ours is 3' 6" to 4' long, the chuck stands at about waist height.

Martiin P
1 May 2015 at 09:24 #188272
Ralph H
Participant
@ralphh
Thank you Martin, that makes your words even more useful to me

Thank you both for the replies
1 May 2015 at 09:33 #188274
Ady1
Participant
@ady1
Graces can have useful info on old companies

Good quality PDFs of "The Engineer" can be downloaded which are full of old pictures of gadgets from a bygone age, plus they are all pdf searchable

Edited By Ady1 on 01/05/2015 09:40:09
1 May 2015 at 09:53 #188275
KWIL
Participant
@kwil
Be cautious in relying upon Graces, a Halifax company Willson Lathes, formed in the late 1800s is shown as being established in the 1940's!!
1 May 2015 at 10:38 #188279
Ralph H
Participant
@ralphh
There is some interesting stuff on there, particularly some of the older adverts but yes, many records are incomplete and if they cna be that far out then everything must be taken with a pinch of salt.
Author

Posts