Steam Brake Valve

This topic has 3 replies, 2 voices, and was last updated 20 January 2021 at 21:08 by Thomas Pawley 1.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
20 January 2021 at 16:38 #521319
Thomas Pawley 1
Participant
@thomaspawley1
Good afternoon. Could anyone suggest a source for drawings of a steam brake valve please. It's for a 7 1/4 loco. Tom.
Advert

20 January 2021 at 16:38 #1998
Thomas Pawley 1
Participant
@thomaspawley1
20 January 2021 at 19:14 #521347
Clive Brown 1
Participant
@clivebrown1
For 5" gauge;any help?
20 January 2021 at 21:08 #521377
Thomas Pawley 1
Participant
@thomaspawley1
Thanks for the reply, yes, could be scaled up perhaps? Tom
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Most used ‘rubbish’ tool
  Started by: jaCK Hobson in: The Tea Room
- 8
- 11
- 5 November 2026 at 13:10
  jaCK Hobson
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 11
- 17
- 5 November 2026 at 13:09
  Graeme Seed
- A small Hobbing Machine
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 2
- 2
- 5 November 2026 at 12:21
  noel shelley
- Unimat 3 baseplate
  Started by: mart7mcfl7 in: Manual machine tools
- 4
- 8
- 5 November 2026 at 12:20
  JasonB
- BCA MK III Jig Borer
  Started by: pjh in: Help and Assistance! (Offered or Wanted)
- 6
- 9
- 5 November 2026 at 11:48
  Clive Foster
- Shape of Boxford fixed steady blocks
  Started by: Grindstone Cowboy in: Beginners questions
- 7
- 8
- 5 November 2026 at 11:00
  Nicholas Farr
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 3
- 7
- 5 November 2026 at 10:34
  BOB BLACKSHAW 1
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 10
- 12
- 5 November 2026 at 09:01
  Hollowpoint
- 3d Printed Carriage Stop for Warco WM180
  Started by: James A in: Workshop Tools and Tooling
- 1
- 1
- 5 November 2026 at 07:51
  James A
- Richard B’s Minnie.
  Started by: Richard B in: Traction engines
- 4
- 24
- 4 November 2026 at 23:26
  Richard B
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 13
- 4 November 2026 at 23:21
  Richard B
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 7
- 4 November 2026 at 22:03
  Pete
- SOLIDWORKS for MAKERS
  Started by: Paul Lousick in: CAD – Technical drawing & design
- 2
- 3
- 4 November 2026 at 21:54
  Paul Lousick
- 127t Gear With ⅞” Shaft and Keyway – Which Lathe?
  Started by: Captain Barnacles in: Workshop Tools and Tooling
- 15
- 24
- 4 November 2026 at 19:56
  Captain Barnacles
- Richard Simmonds’ “How To Make A Weight Driven Clock”
  Started by: iacooper in: Clocks and Scientific Instruments
- 7
- 10
- 4 November 2026 at 19:49
  iacooper
- Unusual dual speed pulley on motor
  Started by: gerry madden in: Manual machine tools
- 10
- 16
- 4 November 2026 at 17:57
  gerry madden
- WAR FINISH
  Started by: Speedy Builder5 in: The Tea Room
- 10
- 11
- 4 November 2026 at 17:56
  JA
- What Did You Do Today 2026 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 56
- 247
- 4 November 2026 at 17:50
  Nigel Graham 2
- help please in identifying
  Started by: John Holloway in: General Questions
- 4
- 9
- 4 November 2026 at 16:43
  renardiere7
- Mini ER11 milling/drilling unit
  Started by: YouraT in: Manual machine tools
- 5
- 9
- 4 November 2026 at 12:05
  bernard towers
- Lathe improvements? 1 2 … 5 6
  Started by: Niels Abildgaard in: Manual machine tools
- 24
- 130
- 4 November 2026 at 09:14
  Niels Abildgaard
- What aluminium sizes do you regularly use in your workshop?
  Started by: aytact in: Manual machine tools
- 6
- 6
- 4 November 2026 at 09:11
  AStroud
- Stronger Filament 1 2
  Started by: BOB BLACKSHAW 1 in: 3D Printers and 3D Printing
- 12
- 41
- 4 November 2026 at 07:23
  BOB BLACKSHAW 1
- ML10 Dewhurst / Brook Crompton 1 2
  Started by: starjump in: Beginners questions
- 11
- 26
- 4 November 2026 at 00:07
  southernchap
- SolidCraft Features.
  Started by: blowlamp in: CAD – Technical drawing & design
- 5
- 9
- 3 November 2026 at 19:39
  Andy Stopford

Steam Brake Valve

Steam Brake Valve

Latest Replies

Latest Issue

November 2026

Newsletter Sign-up

Latest Replies