Small Power Hacksaw

Small Power Hacksaw

This topic has 27 replies, 13 voices, and was last updated 13 February 2012 at 01:15 by Ian S C.

Viewing 3 posts - 26 through 28 (of 28 total)

Author

Posts
11 February 2012 at 17:49 #84441
Steve Wan
Participant
@stevewan33894
Hi Geoff

Wonder is it possible for you to email me in private, I’m very keen about Blackgates power hacksaw design especially the drive and driven pulleys using rubber belt /bicycle chain.

Awaits your kind reply

Steve Wan
Advert

12 February 2012 at 15:55 #84532
Douglas Johnston
Participant
@douglasjohnston98463
Hi wotsit – yes you have a point, perhaps we were both a bit quick to condemn on limited data. I did actually enjoy building the power hacksaw but in my case the results were rather disapointing.

Doug
13 February 2012 at 01:15 #84586
Ian S C
Participant
@iansc
The main advantage I find with the band saw is being able to use it free hand while its in the vertical possition, for ordenary horizontal work I find little to chose. I’v a good mind to rebuild a recprocating saw, I won’t even need to buy a blade this time, and I still have the saw frame from the old one, its made of 1 1/8″ square steel. Ian S C
Author

Posts

Viewing 3 posts - 26 through 28 (of 28 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Issue 4767 and links
  Started by: Andy Stopford in: Model Engineer & Workshop
- 3
- 3
- 24 July 2025 at 08:02
  Luker
- Diving in to ATC? 1 2
  Started by: Steve355 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 6
- 26
- 24 July 2025 at 08:01
  Julie Ann
- Boiler Design – issue 4765 1 2 … 8 9
  Started by: Charles Lamont in: Model Engineer & Workshop
- 27
- 220
- 24 July 2025 at 07:12
  JasonB
- Lathe index tips
  Started by: petro1head in: General Questions
- 8
- 17
- 24 July 2025 at 06:49
  JasonB
- NEW LOOK – Model Engineer & Workshop 1 2 … 7 8
  Started by: sohara in: Model Engineer & Workshop
- 57
- 182
- 24 July 2025 at 06:40
  derek hall 1
- My vise isn’t at 90 degrees 1 2
  Started by: moonman in: Beginners questions
- 17
- 27
- 24 July 2025 at 06:32
  Neil Lickfold
- Calling all Little John and other Raglan users
  Started by: David Senior in: General Questions
- 5
- 18
- 24 July 2025 at 05:49
  aarknoid
- Adding a quill lock to a drill press 1 2
  Started by: beeza650 in: Manual machine tools
- 12
- 28
- 23 July 2025 at 20:07
  Nicholas Farr
- Amadeal lathes – Any good?? 1 2
  Started by: Tim Sallows in: Workshop Tools and Tooling
- 16
- 31
- 23 July 2025 at 19:50
  JasonB
- Pipe bending by hand versus pipe bending tools
  Started by: Greensands in: Workshop Tools and Tooling
- 6
- 6
- 23 July 2025 at 19:14
  JasonB
- Hopeless…Alibre Ass 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 7
- 44
- 23 July 2025 at 18:51
  David Jupp
- John Robey : Horological Articles downloadable
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 1
- 1
- 23 July 2025 at 18:15
  Michael Gilligan
- Model Engineer Magazine Collection
  Started by: mfengine1 in: Books
- 9
- 13
- 23 July 2025 at 17:52
  mfengine1
- Round Bar Bender
  Started by: Trevor Howley in: Workshop Tools and Tooling
- 7
- 15
- 23 July 2025 at 17:46
  Trevor Howley
- Polishing compounds for stainless steel (mild abrasives))
  Started by: Simon Williams 3 in: Beginners questions
- 14
- 17
- 23 July 2025 at 17:18
  Michael Gilligan
- Arc Euro Trade Ltd. 1 2
  Started by: Ketan Swali in: General Questions
- 43
- 48
- 23 July 2025 at 17:09
  Beardy Mike
- Where is the next page?
  Started by: Bob Worsley in: New Forum Software questions, comments and Test Threads
- 2
- 2
- 23 July 2025 at 16:10
  JasonB
- Edward Thomas excessive wheel slip
  Started by: Ian R in: Locomotives
- 6
- 16
- 23 July 2025 at 15:04
  duncan webster 1
- Seig SX3.5ZP
  Started by: IanT in: Manual machine tools
- 4
- 8
- 23 July 2025 at 14:07
  Ketan Swali
- Woodward/Wilding Gearless clock
  Started by: smf in: Clocks and Scientific Instruments
- 4
- 5
- 23 July 2025 at 10:16
  smf
- Model Engine running just off a naked flame
  Started by: Blue Heeler in: Stationary engines
- 6
- 23
- 23 July 2025 at 01:22
  Blue Heeler
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 39
- 22 July 2025 at 23:07
  David Frith
- Myford S7 VFD problem 1 2
  Started by: Glyn Davies in: Manual machine tools
- 23
- 43
- 22 July 2025 at 16:16
  Robert Atkinson 2
- 5 inch gauge Stirling single
  Started by: Michael Callaghan in: Locomotives
- 6
- 8
- 22 July 2025 at 13:42
  KenL
- Paint stripper does not do what it says on the tin
  Started by: Greensands in: Hints And Tips for model engineers
- 10
- 18
- 22 July 2025 at 11:22
  Nigel Graham 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies