Small lathe steadies

[A D 1Participant @ad1]

[A D 1Participant @ad1]

Hello All,

I am new to this site, so I appreciate the knowledge and wisdom you are sharing. I am looking for a fixed steady for a myford ML7. Myford seem to have them for 111£, while chronos have something very similar looking for around 40£ (unfortunately out of stock). Then I came across one at Hemingway kits for around 41£. Does anyone have feedback on the Hemingway steady, or (being kit suppliers) if it requires a lot of finishing work ? or any pointers on other suitable fixed steady ? Thanks in advance for any help!

[Dave HalfordParticipant @davehalford22513]

?? Two on Ebay right now. Nowhere near £100.

Kits are usually raw castings

[Paul KempParticipant @paulkemp46892]

I got possibly the last large diameter fixed steady from RDG about 2 years ago, they sold it to me at reduced price as it had one finger and a couple of screws missing. It's been very good. Simple to make a new finger to replace the missing one and the clamp screws – I do remember they were an obscure thread though I can't remember what now! It goes up to about 4" in diameter and that has been really useful a couple of times. If I remember right the std myford one is quite limited in what it will hold.

Paul.

[A D 1Participant @ad1]

Thanks for the replies.

Yes I tried RDG and they only seem to do the travelling steadies now. and I think your right- the standard myford one fits only relatively small diameter.

On ebay I see one which has some base welded on-which I think makes it useless for a ml7. One from myford at 144£ and a non-model specific one, which might actually suit

Thanks

[HopperParticipant @hopper]

If you watch eBay UK for a while good used examples come up at reasonable prices fairly regularly.

[Author]

Posts