The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Clocks and Scientific Instruments › platform escapement repair
Has any of our horologist friends ever removed a broken curb pin from a platform escapement. and replaced it. Any advice would be welcome.
Roy
I probably should said that I have a staking tool. And have made and fitted a chronometer balance staff. Years ago I used to repair watches, main springs and complete balances etc.
Has no one got any ideas ?
.
Sorry, Roy … your question simply reminded me of the long-running advert in the Horological Journal.
MichaelG.
MichaelG I have no knowledge of the advert, not receiving the HJ
Perhaps this might be helpful, Niko.
**LINK**
Well-found, Niko
@ Roy … Oops, that was presumptuous of me
The advert was, I believe placed by this chap: **LINK**
https://thetimepiece.co.uk
and often featured the by-line “Stuck on the Platform ?”
Thanks Niko. Just what I needed. Job for the weekend.
Edited By roy entwistle on 02/03/2023 19:31:39
Home › Forums › Clocks and Scientific Instruments › Topics
Started by: John MC in: CAD – Technical drawing & design
duncan webster 1
Started by: Chris Kirby 1 in: Help and Assistance! (Offered or Wanted)
Chris Kirby 1
Started by: Michael Gilligan in: Manual machine tools
bricky
Started by: Geoff Dunsby in: General Questions
bernard towers
Started by: Andrew Tinsley in: General Questions
Julie Ann
Started by: Geoff Byman in: Beginners questions
JasonB
Started by: Werner Schleidt in: Exhibitions, Shows and Club Events
Werner Schleidt
Started by: IanT in: Workshop Tools and Tooling
Geoff Dunsby
Started by: blowlamp in: CAD – Technical drawing & design
Bazyle
Started by: Speedy Builder5 in: Workshop Tools and Tooling
old mart
Started by: Geoff Dunsby in: Workshop Tools and Tooling
Started by: Peter Simpson 3 in: Beginners questions
Andrew Tinsley
Started by: AJBAJB in: Locomotives
AJBAJB
Started by: Dalboy in: Materials
Phil P
Started by: JasonB in: The Tea Room
Speedy Builder5
Started by: Graham Meek in: Manual machine tools
Pete
Started by: engineeredbyhansson in: Manual machine tools
engineeredbyhansson
Started by: Geoff Dunsby in: CAD – Technical drawing & design
Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
renardiere7
Graham Meek
Started by: BOB BLACKSHAW 1 in: The Tea Room
Martin Connelly
Started by: Phil Whitley in: The Tea Room
Phil Whitley
Started by: point.two.five in: Introduce Yourself – New members start here!
point.two.five
Started by: leeboxford280t in: Manual machine tools
John Hinkley
View full reply list.