Myford Oilers (with less bling)

[Chuck TaperParticipant @chucktaper]

[Chuck TaperParticipant @chucktaper]

Dear All

I'm looking to replace oilers on one of the Myfords

Below is what I want (the one on the right) (I find the available brass ones are too shiny and new looking – I know, I know.) And yes I could dismantle them and remove the lacquer and all that but…

Going by the label I located Adams of Coventry but all I can find (design wise) is **LINK** (which is not the same exactly)

I did find this elsewhere **LINK**However this is not actually featured on the Adams site (that I can find!).

Would anyone know if these are "legacy" product or know of a location where such might be available. Or alternatively where a similar item (design wise) might be sourced.

Thank you for your time.

Frank C.

[Michael GilliganParticipant @michaelgilligan61133]

It may be relevant that [despite what the labelling might imply] …

Adams claims to be a distributor

Gits claims to be a manufacturer

MichaelG.

.

Ref. __ your links

[V8EngParticipant @v8eng]

My ML7 has the Adams Oilers I am linking to.

Material – STEEL Finish – NICKEL Sight Chamber – ALUMINIUM Bottle – PLASTIC

It’s about the third illustration down on the linked page and looks just like the one in your photo.

If you download the pdf on the page in my link you will find the units on page 5 of that.

Link to Adams drip feed unit.
Adams

Edited By V8Eng on 29/01/2021 19:01:08

Edited By V8Eng on 29/01/2021 19:04:01

Edited By V8Eng on 29/01/2021 19:04:57

[Author]

Posts