Middleton vee engine

Middleton vee engine

This topic has 2 replies, 2 voices, and was last updated 22 September 2017 at 13:15 by JasonB.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
22 September 2017 at 10:24 #318100
Eric Cox
Participant
@ericcox50497
On the steam chest cover (ME4569 p.424 fig9) the dimensions for the holes add up to 1 3/4" but the plate is only 1 1/2 long. Should the 3/8" measurement be from the side of the plate and not from the 1/8" measurement.
Advert

22 September 2017 at 10:24 #38811
Eric Cox
Participant
@ericcox50497
22 September 2017 at 13:15 #318112
JasonB
Moderator
@jasonb
Yes dim should be from the side, same as the valve chest. It was OK on the hand drawn version just slipped through the net on the redrawn mag version
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Retractable top slide or cross slide?
  Started by: Ian Owen NZ in: Workshop Tools and Tooling
- 5
- 5
- 16 May 2025 at 06:48
  Neil Lickfold
- Digital Archive – No Active Subscription Found
  Started by: Snax.Steam in: Website Questions, Comments, and Suggestions
- 2
- 2
- 16 May 2025 at 06:46
  JasonB
- FreeCAD v1.0 tutorials 1 2
  Started by: Michael Gilligan in: CAD – Technical drawing & design
- 12
- 50
- 16 May 2025 at 06:27
  Speedy Builder5
- Good News! (Newton Abbott – 2026)
  Started by: Nigel Graham 2 in: Exhibitions, Shows and Club Events
- 2
- 2
- 16 May 2025 at 00:12
  Bazyle
- Help Wire 3 Phase 2 Speed Motor
  Started by: Allan Day in: Electronics in the Workshop
- 5
- 6
- 15 May 2025 at 22:45
  Allan Day
- Steel boiler for a 4″ Burrell DCC
  Started by: tinkerer in: Traction engines
- 2
- 3
- 15 May 2025 at 22:03
  tinkerer
- A 5cc version of the 1.3cc Mills Diesel.
  Started by: KEITH BEAUMONT in: I/C Engines
- 5
- 10
- 15 May 2025 at 21:39
  Ramon Wilson
- Serious Sun-Glass 1 2
  Started by: Michael Gilligan in: The Tea Room
- 17
- 48
- 15 May 2025 at 20:45
  Michael Gilligan
- Watchmakers Lathe Question
  Started by: Shaun Churchill in: General Questions
- 6
- 11
- 15 May 2025 at 20:02
  Dell
- Faulty Warco 1630 Item 4085
  Started by: john fletcher 1 in: Manual machine tools
- 2
- 2
- 15 May 2025 at 19:26
  Grizzly bear
- The Honest John motoring website & forum will close in about 5 days.
  Started by: howardb in: The Tea Room
- 9
- 13
- 15 May 2025 at 18:48
  duncan webster 1
- New Control Box for Denford Triac
  Started by: Richard Evans 2 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 9
- 15 May 2025 at 18:32
  John Haine
- New member from sunny Northern Ireland
  Started by: tinkerer in: Introduce Yourself – New members start here!
- 2
- 2
- 15 May 2025 at 17:06
  Howard Lewis
- Help in/nr Hereford
  Started by: simonj34 in: Beginners questions
- 3
- 4
- 15 May 2025 at 16:44
  Howard Lewis
- One minute I am logged in, then the next logged out
  Started by: Michael Callaghan in: General Questions
- 2
- 2
- 15 May 2025 at 16:14
  JasonB
- Removing side tank hand pump
  Started by: Mark Salzedo 1 in: Beginners questions
- 4
- 9
- 15 May 2025 at 16:09
  Mark Salzedo 1
- Scam email 1 2
  Started by: Ian McVickers in: General Questions
- 21
- 35
- 15 May 2025 at 16:05
  old fool
- fly cutter bit
  Started by: aytact in: General Questions
- 8
- 9
- 15 May 2025 at 15:58
  Pete
- Old Radio Book
  Started by: old fool in: Books
- 5
- 6
- 15 May 2025 at 15:12
  old fool
- Alternative linisher
  Started by: Dalboy in: Manual machine tools
- 4
- 5
- 15 May 2025 at 15:00
  Dalboy
- ME&W printed not being delivered
  Started by: michael rietveld in: Model Engineer.
- 1
- 1
- 15 May 2025 at 14:09
  michael rietveld
- Enclosure works
  Started by: Dave S in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 5
- 15 May 2025 at 11:36
  Colin Reed
- Poor Experience with Auction Site Seller
  Started by: Chris Crew in: The Tea Room
- 12
- 17
- 15 May 2025 at 09:58
  Tony Pratt 1
- Sino DRO not working
  Started by: leafgold in: Beginners questions
- 3
- 5
- 15 May 2025 at 07:51
  Clive Foster
- Boxford Model A back gear
  Started by: jilly5599 in: General Questions
- 6
- 18
- 15 May 2025 at 06:53
  jilly5599

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

June 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies