Eurotherm drives

[Alan .204Participant @alan-204]

Hi chaps could any one help me with this please I'm looking for some instructions for a Eurotherm Drive model no 601/003/230/F/00/UK it's an inverter on a small lathe I have, I'm trying to reset to factory setting but can't figure it out up to now, thanks in advance chaps.

Alan.

[Alan .204Participant @alan-204]

[John RuddParticipant @johnrudd16576]

Manual here….

http://stubbylatheusa.com/manuals/Eurotherm_601_VFD_Manual.pdf

To reset to factory defaults,

With the power off to the inverter, press both up and down arrow keys simultaneously and the power up……..

Hope this helps…

[Les Jones 1Participant @lesjones1]

Hi Alan,
You can find this manual by doing a Google search for "Eurotherm Drive manual"

Les.

[Johnboy25Participant @johnboy25]

Hi Alan…

Try http://stubbylatheusa.com/manuals/Eurotherm_601_VFD_Manual.pdf

I just google Eurotherm 601. I'm pretty well up on Eurotherm now Parker SSD. But have a go – I'm not totally familiar with this drive but as there out of the same stable as it were there's probably some similarity.

John

[Johnboy25Participant @johnboy25]

Mmm – Great minds or is it fools seldom differ!

[Alan .204Participant @alan-204]

Thanks chaps Ive been looking but couldn't find anything, I knew this would be the place to ask.

Thanks again, Alan.

[Alan .204Participant @alan-204]

Been out and reset it but still no joy, I'll have a look tomorrow when I get home.

Al.

[John RuddParticipant @johnrudd16576]

Posted by Johnboy25 on 30/11/2015 22:00:26:

Mmm – Great minds or is it fools seldom differ!

Hardly an appopriate comment when helpful/constructive advice is freely given……

[Author]

Posts