Amadeal AMABL210E Review – Any Requests?

[Hugh Stewart-Smith 1Participant @hughstewart-smith1]

hello Nick,

We already have the 250E (ELS) lathe in stock – both 550 and 750 length. If you are anywhere near London, you’d be welcome to take a look.

hello Jason,

The EL250 and EL300 are already on our shopping list and expect to have stock later this year.                                  Looking forward to your review.                                                                                                                            (Luke is away for a couple of days in Bulgaria for a stag do. I’m not sure what state he’ll been in on his return!)

Regards to you both

Hugh                                                                                                                           Amadeal Ltd

[Clive FosterParticipant @clivefoster55965]

Might be worth running through the difference in inherent capabilities between an ELS machine and a manual / CNC (or “teach”) lathe for the benefit of folk who may be considering DIY upgrading to either full electronic control or full CNC in the future.

Despite the apparent overlap in capabilities between a carefully driven ELS lathe and a “teach” style machine basically running point to point by loading cut start and end points the mechanical (and financial) issues to be considered in upgrading are probably considerable.

Heck if it were that simple there would be no market for an ELS lathe. Might as well make a manual electronic CNC “upgrade ready” lathe for “a few £ more” and be done with it.

Clive

[Author]

Posts