A good story …

A good story …

This topic has 4 replies, 4 voices, and was last updated 30 December 2024 at 20:33 by Plasma.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
30 December 2024 at 19:22 #773500
Michael Gilligan
Participant
@michaelgilligan61133
… not sure where it fits in the forum, so Tea Room it is.

MichaelG.

.
Advert

30 December 2024 at 19:26 #773503
JasonB
Moderator
@jasonb
?
30 December 2024 at 19:39 #773504
Michael Gilligan
Participant
@michaelgilligan61133
Link must have fallen down the gap !

https://apple.news/AwH6dF2OISOCVco_EBR-19g

or

https://www.bbc.co.uk/news/articles/cn7m8dmkglxo

MichaelG.
30 December 2024 at 20:33 #773521
Nigel Graham 2
Participant
@nigelgraham2
Couldn’t do it now. There’d not be time to write the Risk Assessment and prove the driver’s RAC tank-driving qualifications.
30 December 2024 at 20:33 #773522
Plasma
Participant
@plasma
I suppose it all depends on how high the bridge had raised. Doesn’t one leaf go up first followed but the other?

I’d guess the gap wasn’t very big as evel knieval never jumped a double decker bus over a row of motorcycles. Lol.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Gears
  Started by: Franco Convertini in: General Questions
- 6
- 10
- 8 October 2026 at 00:41
  duncan webster 1
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 5
- 7
- 7 October 2026 at 23:51
  Richard B
- Moving Targets
  Started by: Michael Gilligan in: The Tea Room
- 3
- 4
- 7 October 2026 at 23:28
  duncan webster 1
- Reverting An ML7 To Change-Wheels: Any Thoughts?? 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 20
- 51
- 7 October 2026 at 23:17
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 52
- 203
- 7 October 2026 at 22:19
  Mark Rand
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 2
- 2
- 7 October 2026 at 22:15
  Kiwi Bloke
- Window weights as a source of cast iron.?
  Started by: File Handle in: Materials
- 16
- 17
- 7 October 2026 at 22:06
  Bazyle
- Locomotion No 1 – plans
  Started by: Bob Wild in: Help and Assistance! (Offered or Wanted)
- 3
- 4
- 7 October 2026 at 21:31
  Nicholas Farr
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 1
- 2
- 7 October 2026 at 20:17
  JasonB
- Parkside Electronics
  Started by: Clive Steer in: General Questions
- 8
- 21
- 7 October 2026 at 20:06
  Robert Atkinson 2
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 1
- 1
- 7 October 2026 at 20:05
  chris1984
- A nice Lidl improvement … ULGD 5.0 E4
  Started by: Michael Gilligan in: Electronics in the Workshop
- 3
- 3
- 7 October 2026 at 19:07
  peak4
- Leeky diverter valve on a ‘telephone’ style bath/shower mixer tap
  Started by: jon hill 3 in: Related Hobbies including Vehicle Restoration
- 9
- 21
- 7 October 2026 at 17:16
  jon hill 3
- Current Thoughts on 3 Phase Smart Meters
  Started by: Colin Heseltine in: The Tea Room
- 5
- 5
- 7 October 2026 at 16:28
  howardb
- Where is it all going? Claude – CAD – product
  Started by: Mike Hurley in: CAD – Technical drawing & design
- 9
- 15
- 7 October 2026 at 13:57
  David Senior
- Myford ML7 gearbox and how it affects metric change wheels.
  Started by: philml7 in: Introduce Yourself – New members start here!
- 8
- 12
- 7 October 2026 at 13:00
  Nigel Graham 2
- Turbo 90 welding set
  Started by: Michael Callaghan in: Workshop Tools and Tooling
- 5
- 5
- 7 October 2026 at 11:44
  jon hill 3
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 6
- 15
- 7 October 2026 at 11:21
  peter1972
- New Member
  Started by: starjump in: Introduce Yourself – New members start here!
- 1
- 1
- 7 October 2026 at 10:40
  starjump
- Hello everyone
  Started by: andrew998 in: Introduce Yourself – New members start here!
- 3
- 3
- 7 October 2026 at 10:22
  noel shelley
- Hemholtz coil positioning
  Started by: John Purdy in: Clocks and Scientific Instruments
- 2
- 4
- 7 October 2026 at 06:07
  John Haine
- Portoss lathe – new to me.
  Started by: File Handle in: Beginners questions
- 6
- 16
- 7 October 2026 at 00:15
  Nigel Graham 2
- Blank posts in forum
  Started by: Mark Rand in: New Forum Software questions, comments and Test Threads
- 5
- 5
- 6 October 2026 at 18:32
  JasonB
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 7
- 15
- 6 October 2026 at 17:41
  Mick Bailey
- 5 inch gauge Stirling single injector position
  Started by: Michael Callaghan in: Locomotives
- 2
- 2
- 6 October 2026 at 17:33
  Baz

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies