Hand operated bench drill

This topic has 2 replies, 2 voices, and was last updated 30 June 2011 at 20:49 by Sub Mandrel.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
29 June 2011 at 21:13 #5557
john willman 1
Participant
@johnwillman1
Advert

29 June 2011 at 21:13 #71062
john willman 1
Participant
@johnwillman1
When I built a Dore Westbury mill about 30 years ago I used such a drill for the entire project plus a rather poor Perfecto lathe. The type with a ratchet feed are excellent and if your right arm is not strong enough a hole can be gradually opened out up to about 5/8″. The type with a flywheel on top which rely on a difference between flywheel and spindle speed to create the feed are much more difficult to use and only seem to work when there is resistance to the point of the drill. It was almost impossible to open out a hole once drilled.

One very useful application is that when the work is very large ,the drill can often be clamped to it.
30 June 2011 at 20:49 #71124
Sub Mandrel
Participant
@submandrel
My Dad has one of those, and he only got it about 10 years ago.

Neil
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Laser centre finder 1 2
  Started by: Buffer in: General Questions
- 15
- 32
- 5 July 2026 at 17:44
  Robert Atkinson 2
- Brass covered steel
  Started by: Dougie Swan in: General Questions
- 9
- 9
- 5 July 2026 at 16:52
  ega
- Testing Single Point Thread Fitment 1 2
  Started by: berwick in: Beginners questions
- 17
- 30
- 5 July 2026 at 16:44
  Michael Gilligan
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 41
- 5 July 2026 at 15:45
  Nick Welburn
- Accolade
  Started by: Bill Dawes in: General Questions
- 6
- 6
- 5 July 2026 at 13:26
  Philip Rowe
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 51
- 5 July 2026 at 13:22
  southernchap
- Flat Surface 1 2 3
  Started by: COLIN MARTIN 2 in: Materials
- 32
- 56
- 5 July 2026 at 13:15
  southernchap
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 9
- 10
- 5 July 2026 at 12:57
  Martin Johnson 1
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 8
- 18
- 5 July 2026 at 10:29
  John Haine
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 5
- 9
- 5 July 2026 at 10:06
  michael m
- Identifying the pitch of threading inserts
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 5
- 12
- 4 July 2026 at 20:19
  Bill Phinn
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 324
- 4 July 2026 at 16:46
  Phil Whitley
- NPT thread
  Started by: Bill Dawes in: General Questions
- 8
- 11
- 4 July 2026 at 15:46
  Dave Halford
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 26
- 4 July 2026 at 15:12
  SteveP
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 118
- 4 July 2026 at 13:27
  JasonB
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 6
- 9
- 3 July 2026 at 22:23
  Mark Rand
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 16
- 23
- 3 July 2026 at 22:12
  Chris Crew
- Leadscrew Handwheel for Warco WM180
  Started by: James A in: Manual machine tools
- 9
- 17
- 3 July 2026 at 20:45
  Andy Stopford
- Clarkson radius grinding attachment
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 5
- 10
- 3 July 2026 at 19:28
  Clive Foster
- Gas Tap Valves. Vintage 1 2 3 4
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 22
- 88
- 3 July 2026 at 18:36
  duncan webster 1
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 28
- 65
- 3 July 2026 at 17:20
  vintagengineer
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 3
- 8
- 3 July 2026 at 10:54
  bernard towers
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 58
- 2 July 2026 at 22:45
  dean clarke 2
- Running 380V 3-phase motor on 230V 1-phase 1 2 3 4
  Started by: jimalm in: Electronics in the Workshop
- 20
- 85
- 2 July 2026 at 22:38
  Vic
- Lathework for Beginners 1 2 … 4 5
  Started by: Neil Wyatt in: Manual machine tools
- 24
- 111
- 2 July 2026 at 17:36
  Howard Lewis

Hand operated bench drill

Hand operated bench drill

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies