Boxford Industrial 11.30 lathe

Boxford Industrial 11.30 lathe

This topic has 6 replies, 4 voices, and was last updated 27 May 2017 at 09:50 by damian.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
26 May 2017 at 19:26 #299736
damian
Participant
@damiannoble34800
Hi all

A little help required.
Does anyone have a manual for one of these?
Also is there an eye bolt in the bed for lifting it and what thread size is it?
Thanks
Damian
Advert

26 May 2017 at 19:26 #18528
damian
Participant
@damiannoble34800
26 May 2017 at 22:29 #299749
Tractor man
Participant
@tractorman
I have a Boxford X10 lathe and I’ll have a look at the manual to see if it covers the 11 30.
Do you need anything specific. Mick
26 May 2017 at 22:38 #299750
damian
Participant
@damiannoble34800
That would be great thanks.
It is essentially an x10 lathe and any manual is better than nothing.
Cheers Mick
26 May 2017 at 22:57 #299751
JohnF
Participant
@johnf59703
Hi Damien, Yes I have an 11-30, don't recall there being a lifting eye bolt hole but will have a look over the W/End, we used slings and a tractor to move it. I am pretty sure we have manual but it need to be scaned so PM me with your email and I will try and do it for you or maybe a photo copy. Mine is metric.

John

Edited By JohnF on 26/05/2017 22:58:26
26 May 2017 at 23:19 #299754
David Standing 1
Participant
@davidstanding1
The X10 manual is available from Boxford. http://www.boxford.co.uk

There is a lifting eye tapped hole in the bed cross bracing nearest to the chuck, and it is threaded M16x 2. You can alternatively lift it by putting a sling round this bracing (fore and aft through the bed, NOT round it).
27 May 2017 at 09:50 #299796
damian
Participant
@damiannoble34800
Morning all,

I have had two people say there is a tapped hole for an M16 eye bolt. I have one of these (correct one rated at 0.8T).

Many thanks for the help

Damian
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Model dynamo drawings
  Started by: Dougie Swan in: General Questions
- 5
- 16
- 6 June 2025 at 11:56
  Michael Gilligan
- Lathe spindle bearings
  Started by: Sonic Escape in: Beginners questions
- 7
- 11
- 6 June 2025 at 11:50
  gerry madden
- ME beam engine 1 2
  Started by: Jager in: Stationary engines
- 10
- 26
- 6 June 2025 at 11:41
  Nigel Richardson
- Boiler Design – issue 4765 1 2 … 5 6
  Started by: Charles Lamont in: Model Engineer & Workshop
- 23
- 143
- 6 June 2025 at 11:35
  Michael Gilligan
- Kelsey Media buys Mortons titles 1 2 3
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 22
- 71
- 6 June 2025 at 11:25
  SillyOldDuffer
- Aluminium MIG wire
  Started by: Speedy Builder5 in: Materials
- 5
- 8
- 6 June 2025 at 11:18
  noel shelley
- Motorcycle starter motors – any general workshop uses?
  Started by: Robin Graham in: Beginners questions
- 8
- 9
- 6 June 2025 at 09:58
  JasonB
- New member, progress no.1 rest
  Started by: flyingsailor in: Introduce Yourself – New members start here!
- 4
- 5
- 6 June 2025 at 08:48
  parovoz
- 4 Truck Shay 5 inch
  Started by: conrod in: Work In Progress and completed items
- 5
- 16
- 6 June 2025 at 03:02
  conrod
- First lathe – warco 180/210
  Started by: Chris12 in: Beginners questions
- 7
- 9
- 5 June 2025 at 19:40
  Howard Lewis
- 1950 Myford/Drummond type m advice
  Started by: jimmyjaffa in: Beginners questions
- 7
- 16
- 5 June 2025 at 19:25
  Howard Lewis
- A new lathe
  Started by: Sonic Escape in: The Tea Room
- 7
- 11
- 5 June 2025 at 19:18
  Sonic Escape
- Sandvik Coromant 20mm hand-scraper
  Started by: flatline in: Workshop Tools and Tooling
- 9
- 19
- 5 June 2025 at 18:57
  flatline
- Metals supplies and tools
  Started by: DMB in: The Tea Room
- 10
- 11
- 5 June 2025 at 18:39
  Stuart Smith 5
- Finding Unified rivnuts
  Started by: old mart in: Help and Assistance! (Offered or Wanted)
- 5
- 11
- 5 June 2025 at 18:23
  old mart
- Progress no.1 restoration
  Started by: flyingsailor in: Workshop Tools and Tooling
- 3
- 3
- 5 June 2025 at 18:07
  old mart
- Atom3D Q&A 2025
  Started by: Diogenes in: CAD – Technical drawing & design
- 4
- 17
- 5 June 2025 at 17:54
  Diogenes
- Clayton Steam Wagon
  Started by: Paul Lousick in: Traction engines
- 9
- 22
- 5 June 2025 at 17:41
  Nigel Graham 2
- Newall DRO Adjustment
  Started by: Metalhacker in: Help and Assistance! (Offered or Wanted)
- 8
- 15
- 5 June 2025 at 17:23
  Metalhacker
- Dodgy drawings
  Started by: DMB in: Drawing Errors and Corrections
- 4
- 6
- 5 June 2025 at 17:17
  Nigel Graham 2
- Drunk driver broke my workshop! 1 2
  Started by: stew 1 in: The Tea Room
- 19
- 42
- 5 June 2025 at 11:33
  stew 1
- Stuart? MTB 1M
  Started by: JasonB in: Stationary engines
- 7
- 16
- 5 June 2025 at 11:21
  JasonB
- Kelsey Media
  Started by: KEITH BEAUMONT in: Model Engineer & Workshop
- 3
- 4
- 5 June 2025 at 10:58
  KEITH BEAUMONT
- Adept shapers
  Started by: DMB in: Workshop Tools and Tooling
- 3
- 4
- 5 June 2025 at 09:37
  Howard Lewis
- 3 1/2” gauge diesel loco?
  Started by: Paul McDonough in: Locomotives
- 5
- 15
- 5 June 2025 at 08:15
  Paul McDonough

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

June 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies