No oilers

This topic has 2 replies, 2 voices, and was last updated 3 May 2021 at 13:48 by Nigel Graham 2.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
1 May 2021 at 16:50 #542563
glen searle
Participant
@glensearle82757
Hi I have a warco gh universal mill new but it does not have any oiling points for the ways seems mad that I have to dismantle a new machine to fit oil points ? Anyone had this it seems that all of the other smaller Chinese mills have oilers.

Cheers glen
Advert

1 May 2021 at 16:50 #14245
glen searle
Participant
@glensearle82757
3 May 2021 at 13:48 #542885
Nigel Graham 2
Participant
@nigelgraham2
You don't need dismantle it and fit oilers.

I don't think my Myford mill has them – or if it does it's those infuriatingly tiny sprung-ball things apparently intended for lubricating the surrounding paint-work. Nor does my small Denbigh horizontal mill. Without going and looking, I am not sure if my Harrison lathe's saddle has oiling-points for the ways. (I use grease on the milling-machine screws though.)

Wind the table to each end of its travels, oil the exposed surfaces and feed-screws liberally (you might find a small brush the easiest way); and the oil will soon reach the still-hidden areas.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 37
- 12 July 2026 at 01:35
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 41
- 138
- 12 July 2026 at 01:00
  Nigel Graham 2
- Boiler problem
  Started by: Zan in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 11 July 2026 at 23:55
  Nigel Graham 2
- Another what’s this thread….
  Started by: Hollowpoint in: General Questions
- 6
- 9
- 11 July 2026 at 23:48
  Nigel Graham 2
- SmallRig Cheese Plate
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 6
- 11 July 2026 at 23:42
  Nigel Graham 2
- What is this?
  Started by: Sonic Escape in: General Questions
- 16
- 24
- 11 July 2026 at 22:45
  Paul Mills 4
- First Printer
  Started by: vintagengineer in: 3D Printers and 3D Printing
- 3
- 3
- 11 July 2026 at 22:23
  Peter Tucker
- Lathe coolant applicators 1 2
  Started by: lucerne in: Manual machine tools
- 15
- 27
- 11 July 2026 at 22:19
  Julie Ann
- Metal saw
  Started by: Speedy Builder5 in: Workshop Techniques
- 3
- 3
- 11 July 2026 at 19:58
  Robert Atkinson 2
- Air con cost?
  Started by: Ian Parkin in: The Tea Room
- 7
- 8
- 11 July 2026 at 19:34
  Mark Rand
- Impending collapse in NYC
  Started by: Michael Gilligan in: The Tea Room
- 12
- 23
- 11 July 2026 at 17:08
  Michael Gilligan
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 53
- 11 July 2026 at 13:57
  Adam Harris
- Mini-lathe parts source
  Started by: Dunc in: General Questions
- 5
- 6
- 11 July 2026 at 13:11
  JasonB
- Spindle/bearings fit query for X2 type mill 1 2 3
  Started by: fingerscrossed in: Manual machine tools
- 14
- 53
- 11 July 2026 at 12:34
  Dave Halford
- Hole Sizes
  Started by: John Purdy in: 3D Printers and 3D Printing
- 6
- 12
- 11 July 2026 at 10:03
  JasonB
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 5
- 10 July 2026 at 21:37
  old mart
- Cotton-covered flex
  Started by: Kiwi Bloke in: Materials
- 9
- 10
- 10 July 2026 at 20:03
  howardb
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 15
- 22
- 10 July 2026 at 19:39
  Clive Steer
- Farm Boy – Drawing 11
  Started by: Speedy Builder5 in: I/C Engines
- 4
- 4
- 10 July 2026 at 17:15
  John Purdy
- When is a new 90 degree drill not 90 degrees? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 21
- 49
- 10 July 2026 at 16:48
  Nicholas Farr
- BridgePort Interact 1 Mk2 parameters
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:31
  tomcnc
- Bridgeport Interact 1 Mark 2 circuit diagrams
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:16
  tomcnc
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 5
- 5
- 9 July 2026 at 20:27
  Wade Beatty
- Tom Senior Vertical Mill Y axis stuck
  Started by: tgglass in: Beginners questions
- 12
- 18
- 9 July 2026 at 19:08
  Michael Gilligan
- Transformer question
  Started by: Wade Beatty in: Electronics in the Workshop
- 3
- 5
- 9 July 2026 at 17:30
  Robert Atkinson 2

No oilers

No oilers

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies