Unusual vertical slide

This topic has 15 replies, 6 voices, and was last updated 12 December 2016 at 15:45 by Mike Payne 1.

Viewing 16 posts - 1 through 16 (of 16 total)

Author

Posts
11 December 2016 at 11:20 #271147
Mike Payne 1
Participant
@mikepayne1
Hi,

I have just acquired this vertical slide that I think is unusual in that it has a v-groove cut in the table and a conical (concave) base.

I'm sure these are original features as it looks unused, just slightly tarnished from storage. The table measures 3 3/4" x 8".

Does anyone have any idea of the lathe it is meant to fit?

I will be using it on my Raglan probably with a t-slotted table.

Thanks

Mike

Edited By Mike Payne 1 on 11/12/2016 11:33:09
Advert

11 December 2016 at 11:20 #12831
Mike Payne 1
Participant
@mikepayne1
11 December 2016 at 11:28 #271151
Michael Gilligan
Participant
@michaelgilligan61133
Mike,

Sorry, I don't recognise it … but it looks an excellent design

For the convenience of others: **LINK**

http://s988.photobucket.com/user/mikebeetle/media/IMG_0396.jpg.html

MichaelG.
11 December 2016 at 11:33 #271152
Mike Payne 1
Participant
@mikepayne1
Sorry I have just edited links.
11 December 2016 at 11:44 #271158
Neil Wyatt
Moderator
@neilwyatt
Nice an meaty! The relieved base will sit flat easily. You could use a V-block style u-clamp to hold round stock in the V.
11 December 2016 at 12:06 #271164
Michael Gilligan
Participant
@michaelgilligan61133
The table looks remarkably like this [for Boxford] **LINK**

https://goo.gl/images/2ZEg1h

MichaelG.
11 December 2016 at 13:19 #271176
Mike Poole
Participant
@mikepoole82104
I think it might be by Harrison.

Mike
11 December 2016 at 13:34 #271180
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Michael Poole on 11/12/2016 13:19:34:

I think it might be by Harrison.

Mike

.

Pretty sure you are correct, Mike

There is a photo of it [fully kitted-up] here: **LINK**

http://www.lathes.co.uk/harrison/page3.html

MichaelG.
11 December 2016 at 14:29 #271194
Neil Wyatt
Moderator
@neilwyatt
Posted by Michael Gilligan on 11/12/2016 13:34:43:

Posted by Michael Poole on 11/12/2016 13:19:34:

I think it might be by Harrison.

Mike

.

Pretty sure you are correct, Mike

There is a photo of it [fully kitted-up] here: **LINK**

http://www.lathes.co.uk/harrison/page3.html

MichaelG.

Well found, I think that's what they mean by 'fully loaded'

"its mounting boss was hollowed out to provide clearance for the (optional) 4-way toolpost indexing pawl"

Neil
11 December 2016 at 15:35 #271205
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Neil Wyatt on 11/12/2016 14:29:18:

Well found, I think that's what they mean by 'fully loaded'

"its mounting boss was hollowed out to provide clearance for the (optional) 4-way toolpost indexing pawl"

Neil

.

Can you recommend a "fit for purse" modern equivalent, Neil ?

… or should I continue looking for a vintage one?

MichaelG.
11 December 2016 at 15:37 #271206
Mike Poole
Participant
@mikepoole82104
I think this has come up before here **LINK**

Mike
11 December 2016 at 16:02 #271215
Mike Payne 1
Participant
@mikepayne1
Thanks all for the replies. Have never seen one set up for gear cutting like that!
11 December 2016 at 17:29 #271230
not done it yet
Participant
@notdoneityet
Mike,

Post it up on the Raglan forum. There might be some help from there.
11 December 2016 at 21:48 #271285
Howard Lewis
Participant
@howardlewis46836
My pal has a Raglan, Little John, so if would have to fit in place of the toolpost, (No T slot on the Cross Slide).

Also, from memory, it would need an adaptor to match the Cross Slide.

Anything helpful on the Lathes website, whi ch is usually a mine of good info?

Howard
11 December 2016 at 22:06 #271288
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Howard Lewis on 11/12/2016 21:48:52:

Anything helpful on the Lathes website, whi ch is usually a mine of good info?

.

Yes … the link that I posted at 13:34:43 today

MichaelG.

Edited By Michael Gilligan on 11/12/2016 22:08:17
12 December 2016 at 15:45 #271378
Mike Payne 1
Participant
@mikepayne1
Happy that it is a Harrison slide. Thanks all. Might be able to justify that T-slotted cross slide I have been looking at for ages now!
Author

Posts