Machine cabinet Handles

Advert

New Replies

Report Bug

Help/FAQs

Machine cabinet Handles

This topic has 13 replies, 12 voices, and was last updated 14 November 2013 at 18:20 by Sub Mandrel.

Viewing 14 posts - 1 through 14 (of 14 total)

Author

Posts
13 November 2013 at 17:46 #12217
Gray62
Participant
@gray62
For a Boxford Shaper
Advert

13 November 2013 at 17:46 #135443
Gray62
Participant
@gray62
I'm looking for a cabinet door handle of the type used on this Boxford shaper

Does anyone know where I can obtain these?

I also need the side door for my shaper so if anyone has one lying around that they no longer need…… OK so that last request is a long shot

cheers

Graeme
13 November 2013 at 17:59 #135444
John Baguley
Participant
@johnbaguley78655
Posted by CoalBurner on 13/11/2013 17:46:14:

I also need the side door for my shaper so if anyone has one lying around that they no longer need…… OK so that last request is a long shot

I need the front one for mine

John
13 November 2013 at 18:21 #135445
John Hinkley
Participant
@johnhinkley26699
Can't tell the size from the picture, but they look very similar to the original Mini boot handles, to me. I think they are available from various mini restoration specialists or secondhand.

John
13 November 2013 at 21:29 #135458
V8Eng
Participant
@v8eng
Edited By V8Eng on 13/11/2013 21:49:51

Edited By V8Eng on 13/11/2013 21:57:15
13 November 2013 at 22:22 #135462
Robbo
Participant
@robbo
CB

for all types of cabinet handles have a look at http://www.faparkes.co.uk but be warned it can be slow!

Phil
14 November 2013 at 07:33 #135473
daveb
Participant
@daveb17630
Garage door handles from Toolstation, not exactly the same but don't look too much out of place.

Dave
14 November 2013 at 08:24 #135477
V8Eng
Participant
@v8eng
Not sure what happened to my previous post, it had been a very long day, well that's my excuse!

RS do similar ones.

**LINK**

Edited By V8Eng on 14/11/2013 08:25:15
14 November 2013 at 08:51 #135483
Speedy Builder5
Participant
@speedybuilder5
Roneo Vickers office cabinets have similar looking handles – else its a nice project to make one !!
14 November 2013 at 09:14 #135491
John McNamara
Participant
@johnmcnamara74883
Hi CoalBurner

I notice they are called T handles

I Found this US Site using the following Google search:
images steel storage cabinet handles

**LINK**

And This one from the following search
T handles chrome United kingdom

However it is in the Netherlands !
**LINK**

Oh

And Farnel have em for ten times the price…

http://uk.farnell.com/t-handles

Cheers
John

Edited By John McNamara on 14/11/2013 09:29:14
14 November 2013 at 15:36 #135523
Saxalby
Participant
@saxalby
Re the missing doors. I had a lathe cabinet door (not so different to the shaper door) made by a local sheet metal company, all nicely welded up on the corners, they even louvred the door.

Regards Barry
14 November 2013 at 16:29 #135524
richardandtracy
Participant
@richardandtracy
I can measure mine tonight.

As for the door…

Have you got any gash plywood lying around? Given how valuable shapers are at the moment, it seems pointless in getting something made up that will cost anything, as it'll rapidly exceed the resale value of the whole machine.

Regards,

Richard
14 November 2013 at 16:57 #135525
Mike Poole
Participant
@mikepoole82104
RS have similar handles at a price

Mike
14 November 2013 at 18:20 #135536
Sub Mandrel
Participant
@submandrel
If you only want two, find a place that does second hand office furniture, they will probably be able to find you a couple from cabinets that are too old fashioned to clean up and sell.

Neil
Author

Posts