Urgent Safety Notice – Coronet Envoy and Coronet Regent

Urgent Safety Notice – Coronet Envoy and Coronet Regent

This topic has 2 replies, 2 voices, and was last updated 2 August 2021 at 23:20 by Michael Gilligan.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
2 August 2021 at 22:32 #556781
peak4
Participant
@peak4
Just in case we have any wood turners on here, I've just come across this on a Facebook group.

Coronet Envoy and Coronet Regent Safety Notice.
https://recordpower.co.uk/pages/coronet-envoy-and-regent-safety-notice?

Looks like a potentially dodgy bolt holding down the headstock.

Bill
Advert

2 August 2021 at 22:32 #34489
peak4
Participant
@peak4
2 August 2021 at 23:20 #556782
Michael Gilligan
Participant
@michaelgilligan61133
How very refreshing to see a hobbyists’ machine-tool supplier acting like this.

MichaelG.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- “Your Sketch Is Not Closed,” says Alibre Atom, “So tough!”HERE?ERE?
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 8
- 17
- 28 July 2025 at 21:04
  David Jupp
- Amadeal lathes – Any good?? 1 2
  Started by: Tim Sallows in: Workshop Tools and Tooling
- 19
- 37
- 28 July 2025 at 20:53
  Mark Hall
- Boiler Design – issue 4765 1 2 … 9 10
  Started by: Charles Lamont in: Model Engineer & Workshop
- 27
- 229
- 28 July 2025 at 20:43
  JasonB
- How to balance a cup grinding wheel
  Started by: Clive B in: Workshop Tools and Tooling
- 7
- 9
- 28 July 2025 at 20:25
  Clive B
- milling chuck
  Started by: moonman in: Workshop Tools and Tooling
- 2
- 2
- 28 July 2025 at 20:01
  bernard towers
- Trilever lathe
  Started by: Stewart Mills in: General Questions
- 10
- 10
- 28 July 2025 at 19:20
  SillyOldDuffer
- Starting up again if I can find a plan
  Started by: doitagain in: Introduce Yourself – New members start here!
- 3
- 5
- 28 July 2025 at 18:46
  Robert Atkinson 2
- A little bit on the side
  Started by: JasonB in: Work In Progress and completed items
- 2
- 4
- 28 July 2025 at 17:20
  Diogenes
- 2 New Atom ??s: Changing Parts and Lost Planes,
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 3
- 3
- 28 July 2025 at 16:41
  David Jupp
- Unusual Crow Bar Type Tool? Fire Brigade?
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 16
- 21
- 28 July 2025 at 16:29
  Nigel Graham 2
- smokeless cutting oil
  Started by: Chris12 in: General Questions
- 14
- 19
- 28 July 2025 at 16:24
  Fulmen
- Isle of Man hobby engineer!
  Started by: Mark Noel in: Introduce Yourself – New members start here!
- 2
- 2
- 28 July 2025 at 14:01
  noel shelley
- Plain bearing speeds
  Started by: zytoooh in: General Questions
- 14
- 18
- 28 July 2025 at 13:49
  zytoooh
- Record 74 auto vice
  Started by: Danni Burns in: Workshop Tools and Tooling
- 9
- 22
- 28 July 2025 at 09:41
  Danni Burns
- Thread restorers
  Started by: old fool in: The Tea Room
- 6
- 7
- 28 July 2025 at 08:35
  AStroud
- Clock gear cutting needed or advice in setting up from scratch.
  Started by: mccormackclockrepairs in: Introduce Yourself – New members start here!
- 10
- 17
- 28 July 2025 at 08:17
  Roger Hart
- Instrumatic Hardness Tester
  Started by: Roderick Jenkins in: Help and Assistance! (Offered or Wanted)
- 2
- 4
- 27 July 2025 at 23:00
  Michael Gilligan
- Bridgeport ways and wear
  Started by: inline in: Manual machine tools
- 9
- 20
- 27 July 2025 at 22:21
  Howard Lewis
- Smart Meter Change-over Problems
  Started by: Alistair Robertson 1 in: The Tea Room
- 3
- 3
- 27 July 2025 at 21:38
  Antony Price
- 2 6 2 model steam train
  Started by: nickbgood25 in: Introduce Yourself – New members start here!
- 3
- 3
- 27 July 2025 at 19:35
  noel shelley
- Which lubricator do I need
  Started by: Michael Callaghan in: Locomotives
- 3
- 9
- 27 July 2025 at 19:31
  Michael Callaghan
- Simple chuck/faceplate threaded mount for mill table
  Started by: Peter Cook 6 in: Workshop Tools and Tooling
- 5
- 10
- 27 July 2025 at 16:12
  Peter Cook 6
- Adcock And Shipley vertical milling head – worth anything?
  Started by: ell81 in: General Questions
- 3
- 4
- 27 July 2025 at 15:53
  ell81
- motor and switch wiring Myford ML7
  Started by: 1957jmh in: Workshop Tools and Tooling
- 7
- 14
- 27 July 2025 at 13:56
  1957jmh
- Yet another scam
  Started by: Dell in: The Tea Room
- 7
- 8
- 27 July 2025 at 13:11
  old fool

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies