The printer port isn’t dead! (linuxcnc is cool and powerful)

The printer port isn’t dead! (linuxcnc is cool and powerful)

This topic has 51 replies, 11 voices, and was last updated 15 March 2024 at 17:46 by sam sokolik.

Viewing 2 posts - 51 through 52 (of 52 total)

Author

Posts
28 February 2024 at 17:38 #716712
sam sokolik
Participant
@samsokolik60334
If I did the math right.. The servo is turning at almost 4000 rpm at 250ipm. That data sheet for these servos say the no load speed of these servos at 24v is 4916rpm.. So – I think 250ipm is where I am keeping it.

sam
Advert

15 March 2024 at 17:46 #720017
sam sokolik
Participant
@samsokolik60334
making the plastic bits into metal bits..
Author

Posts

Viewing 2 posts - 51 through 52 (of 52 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- New member (a young’un)
  Started by: tomread12 in: Introduce Yourself – New members start here!
- 4
- 4
- 29 July 2025 at 21:49
  Howard Lewis
- “Your Sketch Is Not Closed,” says Alibre Atom, “So tough!”HERE?ERE?
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 8
- 22
- 29 July 2025 at 21:49
  Nigel Graham 2
- Another Mystery Tool!
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 8
- 9
- 29 July 2025 at 21:29
  not done it yet
- Recommended storage for heavy lathe tooling
  Started by: choochoo_baloo in: Help and Assistance! (Offered or Wanted)
- 4
- 4
- 29 July 2025 at 21:23
  Nigel Graham 2
- milling chuck
  Started by: moonman in: Workshop Tools and Tooling
- 10
- 17
- 29 July 2025 at 21:05
  Wink Hackman
- Boiler Design – issue 4765 1 2 … 9 10
  Started by: Charles Lamont in: Model Engineer & Workshop
- 28
- 233
- 29 July 2025 at 20:57
  Phill Spowart
- A little bit on the side
  Started by: JasonB in: Work In Progress and completed items
- 3
- 6
- 29 July 2025 at 20:32
  JasonB
- My experiences with an ELS lathe
  Started by: David Senior in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 19
- 29 July 2025 at 19:42
  David Senior
- Gib adjustment on SX2 P mill
  Started by: John Gray 7 in: Workshop Techniques
- 3
- 7
- 29 July 2025 at 19:38
  John Gray 7
- smokeless cutting oil 1 2
  Started by: Chris12 in: General Questions
- 15
- 27
- 29 July 2025 at 19:19
  Chris12
- Thread restorers
  Started by: old fool in: The Tea Room
- 8
- 9
- 29 July 2025 at 19:14
  Fulmen
- Amadeal lathes – Any good?? 1 2
  Started by: Tim Sallows in: Workshop Tools and Tooling
- 21
- 42
- 29 July 2025 at 17:53
  SillyOldDuffer
- Unusual Crow Bar Type Tool? Fire Brigade?
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 16
- 22
- 29 July 2025 at 17:30
  Martin King 2
- A lot of al/alloy, new engine, just finished
  Started by: half whit in: Work In Progress and completed items
- 3
- 3
- 29 July 2025 at 17:09
  Diogenes
- Isle of Man hobby engineer!
  Started by: Mark Noel in: Introduce Yourself – New members start here!
- 4
- 5
- 29 July 2025 at 16:14
  Mark Noel
- Trilever lathe
  Started by: Stewart Mills in: General Questions
- 10
- 12
- 29 July 2025 at 15:07
  Stewart Mills
- Record 74 auto vice 1 2
  Started by: Danni Burns in: Workshop Tools and Tooling
- 11
- 26
- 29 July 2025 at 14:50
  Danni Burns
- Starting up again if I can find a plan
  Started by: doitagain in: Introduce Yourself – New members start here!
- 4
- 7
- 29 July 2025 at 13:43
  JasonB
- How to balance a cup grinding wheel
  Started by: Clive B in: Workshop Tools and Tooling
- 9
- 14
- 29 July 2025 at 13:10
  noel shelley
- Hofmann Rollers
  Started by: Martin Kyte in: General Questions
- 12
- 20
- 29 July 2025 at 13:02
  Michael Gilligan
- Adcock And Shipley vertical milling head – worth anything?
  Started by: ell81 in: General Questions
- 4
- 5
- 29 July 2025 at 12:18
  Nigel McBurney 1
- Plain bearing speeds
  Started by: zytoooh in: General Questions
- 14
- 19
- 29 July 2025 at 11:08
  Howard Lewis
- Bridgeport ways and wear
  Started by: inline in: Manual machine tools
- 10
- 21
- 29 July 2025 at 08:25
  larry phelan 1
- 2 New Atom ??s: Changing Parts and Lost Planes,
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 3
- 4
- 28 July 2025 at 21:06
  Nigel Graham 2
- Clock gear cutting needed or advice in setting up from scratch.
  Started by: mccormackclockrepairs in: Introduce Yourself – New members start here!
- 10
- 17
- 28 July 2025 at 08:17
  Roger Hart

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies