Suppliers of Inperial Grub screws?

[Dennis MulhairParticipant @dennismulhair15799]

Hello,

Does anybody know who would supply the following 1/4” BSF grub screws. I need 10 of each of them to restore an old Myford ML7 lathe.

I have had a quote form E C Pitcher's but they have a minimum postage cost of £7.50 and cannot supply either of the 5/16" screws

Length

3/8” cup point

5/16” cup point

3/4” cup point

1/4” cup point

5/16” Half dog point

Dennis Mulhair

[Dennis MulhairParticipant @dennismulhair15799]

[JasonBModerator @jasonb]

Myford/RDG list spare grub screws

**LINK**

 Lathespares have some

Emkay though they don't state the point

 

Edited By JasonB on 25/09/2014 18:53:55

[clogsParticipant @clogs]

HI Dennis, try south essex fastener's…they are on the webb…..

I get a lot of my weired stuff from them and small quantity no problem……and they post….

frank in france

[Phil WhitleyParticipant @philwhitley94135]

Dennis, Where are you in the country? Our local supplier in the Hull area is FR SCOTT, they have a website

http://www.frscott.com/

Phil,

East Yorks.

[Harry WilkesParticipant @harrywilkes58467]

I've had success in the past with E.C.Pitcher in the West Midland they do have a website for contact details !

[John CParticipant @johnc47954]

I have found Emkay very helpful.

John

[Nicholas FarrParticipant @nicholasfarr14254]

Hi, if you have a Hayleys branch near you, try them; **LINK**

You could also try any nut and bolt supplyers to industry that may be in your locality.

Regards Nick.

[Dennis MulhairParticipant @dennismulhair15799]

Thanks folks for your replies. I think I have got everything except the 5/16th half dog point screws. I am going to use ordinary cup ones instead. I'm sure it wont be too much of a problem.

It seems that outside of the US BSF is becoming very difficult to source. Well it is here in west London!

Once again, Thanks everyone for your help

Dennis

[Author]

Posts