need mt2 x m12x1 chuck arbor

[mick70Participant @mick70]

arc don't sell them and can't find one.

anyone know where i can get one pls?

[mick70Participant @mick70]

[Brian GParticipant @briang]

In the past I am sure both RDG and Chronos had them, as well as M12 x 1 chucks, but I cannot see any now. There is one on eBay though **LINK**

Brian

[mick70Participant @mick70]

might have to open e-bay account been trying not to.

[Roger Provins 2Participant @rogerprovins2]

Have you tried RC Machines they're in Luxembourg but they deliver quickly.

Roger

[Mike E.Participant @mikee-85511]

Posted by naughtyboy on 08/11/2016 10:40:22:

might have to open e-bay account been trying not to.

I just did about 3 weeks ago, and have already spent my monthly pension.

[mick70Participant @mick70]

that's my worry lol.

not pension but limited funds.

[EmgeeParticipant @emgee]

naughtyboy,

The one shown doesn't have a tang so may not eject from your spindle/holder. Not stated or shown if the plain end is tapped for draw bar or extension to assist ejecting.

Emgee

[Les Jones 1Participant @lesjones1]

Arc Euro sell blank MT2 arbors (such as their part number 120-030-00100) that you could turn down and screwcut to M12. You would also need to buy a screw in tang which they also sell.

Les.

[John ReeseParticipant @johnreese12848]

Lee Jones 1 beat me to it. MT arbors for taper mount chucks, screw mount chucks, and for boring heads are very inexpensive. I would start with one of those. Making the arbor from scratch is a possibility but considering how cheap MT arbors are I would not consider it.

[Author]

Posts