Machine movers

Machine movers

This topic has 7 replies, 7 voices, and was last updated 23 February 2022 at 06:09 by nigel jones 5.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
22 February 2022 at 18:40 #586791
Peter Simpson 3
Participant
@petersimpson3
Has anybody got the details of a reliable machine moving company. Looking to get a lathe moved from York to Manchester ?
Advert

22 February 2022 at 18:40 #11127
Peter Simpson 3
Participant
@petersimpson3
22 February 2022 at 19:20 #586798
John Hinkley
Participant
@johnhinkley26699
From personal experience I can thoroughly recommend Steve Cox aka landylift@aol.com. He advertises on homeworkshop.org.uk web site. In your neck of the woods, too.

John
22 February 2022 at 19:51 #586802
Nigel Bennett
Participant
@nigelbennett69913
+1 for Steve Cox.
22 February 2022 at 20:42 #586810
Brian lightfoot
Participant
@brianlightfoot39268
I can recommend Steve Cox at landylift.
22 February 2022 at 20:43 #586812
peak4
Participant
@peak4
+2 for Landylift.

Bill
23 February 2022 at 05:46 #586831
not done it yet
Participant
@notdoneityet
Always good reports of landylift – but without a weight supplied, it’s difficult to totally recommend him, as his limit may not be high enough….?
23 February 2022 at 06:09 #586833
nigel jones 5
Participant
@nigeljones5
**LINK** facebook page. I have used this chaps services and wouldnt hesitate to use him again.
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Pattern Makers Vice
  Started by: Vic in: The Tea Room
- 3
- 3
- 2 July 2025 at 02:08
  peak4
- Motor won’t start
  Started by: Rowan Sylvester-Bradley in: Beginners questions
- 6
- 6
- 1 July 2025 at 23:52
  noel shelley
- Meddings MF4 Manual
  Started by: Richard Kirkman 1 in: Help and Assistance! (Offered or Wanted)
- 10
- 20
- 1 July 2025 at 23:42
  JohnF
- Speed camera
  Started by: David George 1 in: The Tea Room
- 14
- 16
- 1 July 2025 at 23:25
  Nigel Graham 2
- J&S grinder – belt which way ?
  Started by: gerry madden in: Manual machine tools
- 5
- 6
- 1 July 2025 at 22:53
  Chris Crew
- IME Watchmakers lathe
  Started by: Greensands in: Manual machine tools
- 11
- 16
- 1 July 2025 at 21:41
  Dave S
- Request for a Slot to be Milled in a Shaft
  Started by: James Alford in: Help and Assistance! (Offered or Wanted)
- 9
- 18
- 1 July 2025 at 21:03
  bernard towers
- Bearing boxes for ball race
  Started by: Paul McDonough in: Beginners questions
- 9
- 17
- 1 July 2025 at 21:02
  Paul McDonough
- Twin Engineering’s heavy mill/drill quill removal
  Started by: Martin of Wick in: Manual machine tools
- 7
- 9
- 1 July 2025 at 20:51
  Martin of Wick
- The Stevenson Trophy – Entries Invited
  Started by: Neil Wyatt in: Website Announcements
- 1
- 2
- 1 July 2025 at 18:44
  Neil Wyatt
- The Bradford Cup – Nominations Wanted
  Started by: Neil Wyatt in: Website Announcements
- 1
- 2
- 1 July 2025 at 18:41
  Neil Wyatt
- FreeCAD v1.0 tutorials 1 2 3
  Started by: Michael Gilligan in: CAD – Technical drawing & design
- 12
- 54
- 1 July 2025 at 18:31
  Speedy Builder5
- Haining vertical dairy engine boiler.
  Started by: apprentice in: Beginners questions
- 2
- 2
- 1 July 2025 at 18:26
  JasonB
- All things Beaver Mill 1 2 … 8 9
  Started by: Robert James 3 in: Manual machine tools
- 43
- 208
- 1 July 2025 at 18:22
  Charles Lamont
- Dial test indicator vs Dial indicator
  Started by: martian in: Workshop Tools and Tooling
- 17
- 24
- 1 July 2025 at 16:59
  Clive Foster
- Help for DIY lathe build. 1 2
  Started by: moogie in: Help and Assistance! (Offered or Wanted)
- 16
- 32
- 1 July 2025 at 15:21
  David Senior
- Firth Valve Gear
  Started by: Andy Stopford in: Traction engines
- 9
- 18
- 1 July 2025 at 12:59
  Nigel Graham 2
- M type top slide conversion??
  Started by: jimmyjaffa in: Beginners questions
- 7
- 11
- 1 July 2025 at 11:35
  David George 1
- Offen screw type telescopic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 4
- 9
- 1 July 2025 at 10:41
  Graeme Seed
- 2 Machine lights
  Started by: modeng2000 in: Workshop Tools and Tooling
- 2
- 6
- 1 July 2025 at 08:57
  Dalboy
- New member looking for help
  Started by: manfromthemist in: Introduce Yourself – New members start here!
- 11
- 24
- 1 July 2025 at 08:19
  Juddy
- Wiring up a single phase AC motor with 4 wires
  Started by: ell81 in: Beginners questions
- 6
- 8
- 30 June 2025 at 19:49
  Howard Lewis
- New (old!) member
  Started by: iansoady in: Introduce Yourself – New members start here!
- 3
- 3
- 30 June 2025 at 19:30
  Howard Lewis
- Boiler Design – issue 4765 1 2 … 7 8
  Started by: Charles Lamont in: Model Engineer & Workshop
- 26
- 178
- 30 June 2025 at 12:58
  Paul Kemp
- High strength 4mm steel? 1 2
  Started by: iansoady in: Materials
- 20
- 31
- 30 June 2025 at 10:55
  JohnF

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies