Great service

This topic has 13 replies, 6 voices, and was last updated 1 November 2016 at 19:41 by Adam Phillips.

Viewing 14 posts - 1 through 14 (of 14 total)

Author

Posts
26 October 2016 at 14:57 #263060
Adam Phillips
Participant
@adamphillips50363
Hello everyone. My first post and may I say what a fantastic site this is. The reason for posting is to recommend a local engineering company who using there E D M machine saved my Hauser milling machine spindel that had been badly turned. the 10mm pultra collets now fit perfectly. The company is called Precision international in Chesham Bucks. I droped the job in with them on Monday afternoon and collected at lunchtime the next day for a very good price. I have no connection with this firm but an so pleased that I have to tell sombody
Advert

26 October 2016 at 14:57 #3741
Adam Phillips
Participant
@adamphillips50363
Local engineering
31 October 2016 at 18:15 #264028
Adam Phillips
Participant
@adamphillips50363
Hello everyone. My first post and may I say what a fantastic site this is. The reason for posting is to recommend using local engineering companys A local firm to me who using there E D M machine saved my Hauser milling machine spindel it had been badly turned. the 10mm pultra collets now fit perfectly. I dropped the job in with them on Monday afternoon and collected at lunchtime the next day for a very good price. I am so pleased with the work that I have to tell somebody
31 October 2016 at 19:09 #264043
Neil Wyatt
Moderator
@neilwyatt
So good you aid it twice!

Welcome to the forum Adam.

Neil
31 October 2016 at 19:19 #264046
Adam Phillips
Participant
@adamphillips50363
Yes sorry about that
31 October 2016 at 19:21 #264047
Michael Gilligan
Participant
@michaelgilligan61133
Would this be you, Adam **LINK** ?

http://www.watchcaseworks.co.uk/

It would be good to see more about your work.

MichaelG.

Edited By Michael Gilligan on 31/10/2016 19:22:08
1 November 2016 at 08:59 #264132
Adam Phillips
Participant
@adamphillips50363
yes that's me. Thanks Michael
1 November 2016 at 09:24 #264142
Neil Wyatt
Moderator
@neilwyatt
Nice to see the combination of traditional skills and a 3D printer!

I wish I could work at a level where it was worth worrying if a hinge opened exactly 90 degrees!

Neil
1 November 2016 at 10:42 #264162
Brian H
Participant
@brianh50089
Adams site is well worth a browse some of his work is beyond belief ( at least to a humble retired aerospace engineer!)
1 November 2016 at 12:37 #264171
Adam Phillips
Participant
@adamphillips50363
Thank you Brian!
1 November 2016 at 13:51 #264186
David Colwill
Participant
@davidcolwill19261
Posted by Brian Hutchings on 01/11/2016 10:42:19:

Adams site is well worth a browse some of his work is beyond belief ( at least to a humble retired aerospace engineer!)

Agreed!

David.
1 November 2016 at 18:02 #264233
Adam Phillips
Participant
@adamphillips50363
Thanks David. Glad you liked it
1 November 2016 at 19:23 #264253
John Stevenson 1
Participant
@johnstevenson1
Posted by Neil Wyatt on 01/11/2016 09:24:59:

Nice to see the combination of traditional skills and a 3D printer!

I wish I could work at a level where it was worth worrying if a hinge opened exactly 90 degrees!

Neil

Do what you normally do, design it to go 86 degrees and force it the last 4 degrees
1 November 2016 at 19:41 #264259
Adam Phillips
Participant
@adamphillips50363
No John. those are the one's I get to mend
Author

Posts