Eclipse 171 automatic centre punch spare tips

[Clive FarrarParticipant @clivefarrar90441]

[Clive FarrarParticipant @clivefarrar90441]

I found a thread on here that touched upon the subject but drifted off into merits of the 172 over the 171 etc I could not see the original question answered.

As I am now also in need of the same spare tip I thought I would ask again if any one has a specific source they can quote.

Please note I am very happy with my punch.

I am not interested in alternatives or a discussion of the x/y/z of any thing else.

Please only reply if you know an actual source !

Thank you

Clive

[Michael GilliganParticipant @michaelgilligan61133]

I hope I am wrong, Clive … but this suggests that new spare points are no longer available

**LINK**

https://www.spear-and-jackson.com/products/eclipse-professional-tools/engineers-tools/punches/automatic-centre-punches

MichaelG.

[ hopefully compliant with your request … I am only trying to help ]

[Jon LawesParticipant @jonlawes51698]

**LINK**

This says its for the 65-171R which I think is different unless its just the modern part number, I can't seem to find anything closer.

[Clive FarrarParticipant @clivefarrar90441]

Hi Michael,

Very compliant and very helpful thank you. I had found Spear and Jackson as the brand holder , but not that page.

It does appear a lost cause as a retail item, maybe a pleading e mail to customer services will get a result.

Jon it looks the same and it could be the catalogue No is more complicated than the number they emboss on the punch. Thanks anyway.

Regards Clive

[Clive FarrarParticipant @clivefarrar90441]

Pleading e mail sent . If not then Buck and Hickman at 50% of the price of a whole new punch.

Clive

[Nicholas FarrParticipant @nicholasfarr14254]

Hi Clive, this from B&H's 2008/9 catalogue, may be of interest

Regards Nick.

[HopperParticipant @hopper]

Just make a new tip out of silver steel and harden and temper it. Or sharpen the old one by holding it in your battery drill and contra-rotating against the bench grinder wheel.

[Author]

Posts