DRO Operating manual

[John Taylor 20Participant @johntaylor20]

I have a Colchester Student lathe with Mitutoyo PLL-32L Digital readout , I have recently moved premises and have mislaid the manual for the readout. I know mostly how to use the DRO but one procedure I can't remember is how to clear the parameters after a power cut or being switched off , there is a set order for pressing buttons which I believe is on either page 11 or section 11 of the manual that covers clearing parameters. I can get to the point of setting zero on X &Z but clearing the parameters put the DRO into counting mode.

Does anyone have a manual ( No 029599 ) Series 164 for PLL-32L that they could look in ?

Thanks

[John Taylor 20Participant @johntaylor20]

[OldironParticipant @oldiron]

It may be worth contacting Mitutoyo for the info if no one has a manual. I have found them helpful if a little slow in the past. The other option is a search for a manual supplier but they charge the earth.

regards

[Paul Middleton 6Participant @paulmiddleton6]

Try posting on reddit, they have a massive machinists forum.

[Dick HParticipant @dickh]

I sent you a personal e-mail, login and see.

regards.

[John Taylor 20Participant @johntaylor20]

Cheers Dick I think that could be the one. Will try later today

Regards

John

[John Taylor 20Participant @johntaylor20]

Thanks Dick

Just what I needed

John

[Author]

Posts