Chester Crusader Motor

This topic has 5 replies, 3 voices, and was last updated 8 February 2020 at 12:52 by Oldiron.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
30 January 2020 at 19:03 #449889
jimmy b
Participant
@jimmyb
I've recently changed over to a VFD setup, the old motor is going to thrown away, unless someone can use it.

It needs fetching from near Hinkley, Leicestershire.

Anyone interested, please message me.

Jim
Advert

30 January 2020 at 19:03 #13766
jimmy b
Participant
@jimmyb
8 February 2020 at 09:43 #451217
jimmy b
Participant
@jimmyb
Bumping this back up.

If no one wants it, its going the dump!

Jim
8 February 2020 at 10:05 #451222
pete hammond
Participant
@petehammond94283
Jimmy,

pm sent- by Crusader user – that would be 'red or white' grape full!

Pete
8 February 2020 at 11:12 #451236
jimmy b
Participant
@jimmyb
Its now going to a good home!

Jim
8 February 2020 at 12:52 #451250
Oldiron
Participant
@oldiron
Excellent. I hate to see good items go to the tip.

regards
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Myford motor playing up
  Started by: vintagengineer in: Help and Assistance! (Offered or Wanted)
- 6
- 13
- 30 August 2026 at 16:51
  noel shelley
- Question about GHT’s retracting topslide drawing
  Started by: ega in: Workshop Tools and Tooling
- 7
- 18
- 30 August 2026 at 16:30
  ega
- Advice on a new lathe
  Started by: johnhindle in: General Questions
- 9
- 11
- 30 August 2026 at 16:12
  Howard Lewis
- CHUCK Name
  Started by: Speedy Builder5 in: Workshop Tools and Tooling
- 12
- 17
- 30 August 2026 at 14:22
  gerry madden
- Alternative to a ‘fly’ for braking a clock striking train
  Started by: lfoggy in: Clocks and Scientific Instruments
- 5
- 5
- 30 August 2026 at 14:00
  gerry madden
- Angles to grind for 303 stainless
  Started by: paul1956 in: Beginners questions
- 13
- 17
- 30 August 2026 at 13:21
  Michael Gilligan
- folding pins 3 pin plug
  Started by: Ian Parkin in: Help and Assistance! (Offered or Wanted)
- 4
- 6
- 30 August 2026 at 11:42
  Adrian R2
- Boiler Stays
  Started by: donall.cullinane in: Locomotives
- 3
- 3
- 30 August 2026 at 11:04
  duncan webster 1
- Gauge widening
  Started by: martian in: Beginners questions
- 3
- 4
- 30 August 2026 at 11:00
  noel shelley
- GRAVOGRAPH AF3
  Started by: Speedy Builder5 in: Workshop Tools and Tooling
- 6
- 9
- 30 August 2026 at 09:45
  Howard Lewis
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 22
- 30 August 2026 at 08:43
  Peter Hoerlein
- Reconstruction of dimensions fom a photo…
  Started by: Robin Graham in: Beginners questions
- 8
- 20
- 30 August 2026 at 08:24
  Michael Gilligan
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 164
- 29 August 2026 at 20:43
  Julie Ann
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 329
- 29 August 2026 at 16:01
  Phil Whitley
- Ketan Swali 1 2 3
  Started by: Bill Davies 2 in: The Tea Room
- 44
- 53
- 29 August 2026 at 13:57
  ega
- Decided to use castings
  Started by: BOB BLACKSHAW 1 in: General Questions
- 9
- 18
- 29 August 2026 at 13:41
  BOB BLACKSHAW 1
- Photography in the workshop (for the inept) 1 2
  Started by: Pippin in: Workshop Techniques
- 19
- 34
- 29 August 2026 at 12:58
  Howard Lewis
- Bench Grinder Wheels
  Started by: James Walton in: Manual machine tools
- 9
- 11
- 29 August 2026 at 12:01
  Clive Foster
- I built another one …
  Started by: Mick B1 in: Work In Progress and completed items
- 6
- 6
- 28 August 2026 at 20:53
  old mart
- Sieg x3 Parts
  Started by: Kevin Bennett in: General Questions
- 6
- 8
- 28 August 2026 at 20:14
  Kevin Bennett
- How do I ream a 15mm hole on a Unimat 3 ?
  Started by: paul1956 in: Beginners questions
- 10
- 19
- 28 August 2026 at 17:01
  old mart
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 8
- 15
- 28 August 2026 at 16:25
  Bazyle
- New member
  Started by: donall.cullinane in: Introduce Yourself – New members start here!
- 3
- 3
- 28 August 2026 at 13:50
  noel shelley
- Dreaded leaks
  Started by: waffles in: Locomotives
- 10
- 22
- 28 August 2026 at 08:48
  Dave Wootton
- Taper turning attachment
  Started by: Bernard Reilly in: Workshop Tools and Tooling
- 7
- 9
- 28 August 2026 at 02:20
  Pete

Chester Crusader Motor

Chester Crusader Motor

Latest Replies

Latest Issue

September 2026

Newsletter Sign-up

Latest Replies