Boxford ‘Capstan’ type Cross Slide Handle

Boxford ‘Capstan’ type Cross Slide Handle

This topic has 1 reply, 1 voice, and was last updated 22 August 2016 at 12:57 by Old Elan.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
22 August 2016 at 12:57 #251856
Old Elan
Participant
@oldelan
I posted this question on the Boxford Yahoo group but have had no feedback to date.

Recently I have seen a photograph of a four 'eared' cross slide handle. For the life of me I cannot remember where.

I am interested in having something similar so, any information on the photo's whereabouts and/or drawings for the same would be very helpful.

Roy
Advert

22 August 2016 at 12:57 #12748
Old Elan
Participant
@oldelan
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Twin Engineering’s heavy mill/drill quill removal
  Started by: Martin of Wick in: Manual machine tools
- 6
- 7
- 30 June 2025 at 23:33
  James Frankland
- Bearing boxes for ball race
  Started by: Paul McDonough in: Beginners questions
- 8
- 14
- 30 June 2025 at 22:43
  Stuart Smith 5
- All things Beaver Mill 1 2 … 8 9
  Started by: Robert James 3 in: Manual machine tools
- 42
- 205
- 30 June 2025 at 21:14
  Mark Rand
- IME Watchmakers lathe
  Started by: Greensands in: Manual machine tools
- 4
- 5
- 30 June 2025 at 20:29
  bernard towers
- 2 Machine lights
  Started by: modeng2000 in: Workshop Tools and Tooling
- 2
- 5
- 30 June 2025 at 20:15
  modeng2000
- New member looking for help
  Started by: manfromthemist in: Introduce Yourself – New members start here!
- 9
- 21
- 30 June 2025 at 20:01
  manfromthemist
- Firth Valve Gear
  Started by: Andy Stopford in: Traction engines
- 7
- 15
- 30 June 2025 at 19:58
  Andy Stopford
- Wiring up a single phase AC motor with 4 wires
  Started by: ell81 in: Beginners questions
- 6
- 8
- 30 June 2025 at 19:49
  Howard Lewis
- M type top slide conversion??
  Started by: jimmyjaffa in: Beginners questions
- 4
- 8
- 30 June 2025 at 19:37
  Howard Lewis
- New (old!) member
  Started by: iansoady in: Introduce Yourself – New members start here!
- 3
- 3
- 30 June 2025 at 19:30
  Howard Lewis
- Request for a Slot to be Milled in a Shaft
  Started by: James Alford in: Help and Assistance! (Offered or Wanted)
- 7
- 12
- 30 June 2025 at 19:04
  Craig Brown
- Meddings MF4 Manual
  Started by: Richard Kirkman 1 in: Help and Assistance! (Offered or Wanted)
- 9
- 17
- 30 June 2025 at 16:11
  Richard Kirkman 1
- FreeCAD v1.0 tutorials 1 2 3
  Started by: Michael Gilligan in: CAD – Technical drawing & design
- 12
- 51
- 30 June 2025 at 15:40
  Speedy Builder5
- Boiler Design – issue 4765 1 2 … 7 8
  Started by: Charles Lamont in: Model Engineer & Workshop
- 26
- 178
- 30 June 2025 at 12:58
  Paul Kemp
- High strength 4mm steel? 1 2
  Started by: iansoady in: Materials
- 20
- 31
- 30 June 2025 at 10:55
  JohnF
- What Did You Do Today 2025 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 32
- 172
- 30 June 2025 at 07:37
  Diogenes
- cutting cams
  Started by: bricky in: Help and Assistance! (Offered or Wanted)
- 4
- 14
- 30 June 2025 at 06:54
  JasonB
- Cookies
  Started by: Michael Gilligan in: The Tea Room
- 4
- 4
- 29 June 2025 at 21:42
  Fulmen
- Multi Cylinder Radial Engine.
  Started by: ebeneezer in: I/C Engines
- 3
- 5
- 29 June 2025 at 20:24
  JasonB
- Clarkson MK3 t&c grinder
  Started by: Gerd Vanhaevere in: Manual machine tools
- 5
- 7
- 29 June 2025 at 19:07
  noel shelley
- Offen screw type telescopic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 3
- 7
- 29 June 2025 at 18:41
  bernard towers
- Tell ‘Em Straight! (Anti-virus sellers)
  Started by: Nigel Graham 2 in: The Tea Room
- 3
- 3
- 29 June 2025 at 13:35
  Andrew Crow
- Sanjay’s Banjo Engine
  Started by: JasonB in: Stationary engines
- 3
- 4
- 29 June 2025 at 10:05
  JasonB
- My experiences with an ELS lathe
  Started by: David Senior in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 17
- 29 June 2025 at 08:59
  Diogenes
- TurboCAD Snaps and Dimensioning? 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 8
- 36
- 28 June 2025 at 18:30
  Nigel Graham 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies