Flat spring stainless steel ?

Flat spring stainless steel ?

Home › Forums › Beginners questions › Flat spring stainless steel ?

Viewing 18 posts - 1 through 18 (of 18 total)
  • Author
    Posts
  • #340180
    Tim Stevens
    Participant
      @timstevens64731

      I need a small amount of flat hard-rolled stainless to make a few spiral springs. Just like clock springs but not so many turns. Any ideas of a supplier, please?

      I suppose I could roll some strip to harden it, but no-one handy has a set of capable rolls …

      Cheers, Tim

      #9078
      Tim Stevens
      Participant
        @timstevens64731

        Searching for a supplier

        #340183
        roy entwistle
        Participant
          @royentwistle24699

          What about sizes ? Piece of string comes to mind face 1

          Roy

          #340192
          Tim Stevens
          Participant
            @timstevens64731

            About the size of an alarm clock spring – say 4mm to 5mm wide, and 0.3mm to 0.4mm thick? And in pieces no shorter than about 150mm. Roughly.

            Cheers, Tim

            #340195
            Brian H
            Participant
              @brianh50089

              I've previously used a supplier of spring material to companies making false limbs. This was in Sheffield but they went out of business some years ago but there must be other suppliers.

              Brian

              #340197
              Richard Marks
              Participant
                @richardmarks80868

                An old clock spring or the retractor spring from an old tape measure.

                #340205
                Neil Wyatt
                Moderator
                  @neilwyatt

                  Spring steel strapping? The problem is it's about 12.7mm wide, but it may be possible to cut it with a bench shear.

                  I could pop some in an envelope.

                  Neil

                  #340207
                  Speedy Builder5
                  Participant
                    @speedybuilder5

                    How about "Tensator springs" for use in wet environments. – Do you have any friends that work for a food factory ?

                    **LINK**
                    BobH

                    Edited By Speedy Builder5 on 07/02/2018 15:47:24

                    #340209
                    Neil Wyatt
                    Moderator
                      @neilwyatt

                      Ah. Missed the 'stainless'.

                      #340216
                      Ian P
                      Participant
                        @ianp

                        I have a supply of the SS flat rolled spring wire but its twice the width and thickness you say you need.

                        Its 2.5mm x 0.7mm round edged wire (as used in some windscreen wiper blades), if its of any use I could post some.

                        Ian P

                        #340217
                        Tim Stevens
                        Participant
                          @timstevens64731

                          Neil the Ed says – Missed the 'stainless'.

                          Indeed, and you are not alone. If I could find a stainless clock sprint, or stainless strapping, I would not need to ask here. Or even the spring out of a seat belt, but they all rust.

                          Cheers, Tim

                          #340221
                          Tim Stevens
                          Participant
                            @timstevens64731

                            Hello Ian P – this sounds like a possible answer. I will send you a Personal Message with details, and let's see how we get on.

                            A bit thicker and a bit narrower than my original guess, but certainly helpful.

                            Cheers, Tim

                            #340222
                            Richard S2
                            Participant
                              @richards2

                              If you have to go to a commercial supplier, then you could try these people for a small quantity. Look's like they may have what you need – Steelstrip

                              #340223
                              JohnF
                              Participant
                                @johnf59703

                                Tim, have look at this link it suggests that seat belt springs are made of stainless ?? **LINK**

                                A search around Redditch area may be good its the heart of spring and needle making — or was !

                                Cheers John

                                #340231
                                Nathan Sharpe
                                Participant
                                  @nathansharpe19746

                                  Tim, I'm not sure about their available sizes but we used to use " Bandit" ss strapping on commercial pump hoses. as far as I know they are still in business. Nathan.

                                  #340232
                                  Nathan Sharpe
                                  Participant
                                    @nathansharpe19746

                                    Tim, it's available from " Thorne and Derrick " in the uk. Sizes look useful ! Nathan.

                                    #340627
                                    Tim Stevens
                                    Participant
                                      @timstevens64731

                                      Thanks to Ian P I now have enough stainless spring strip to keep me busy for hours. I now need to work out how best to wind a (shorter than usual) clock spring, so it works out neat and not wobbly.

                                      Thanks to you all for comments and links – all helpful.

                                      Tim

                                      #340636
                                      John Baron
                                      Participant
                                        @johnbaron31275

                                        Hi Tim,

                                        Grab an old window screen wiper from a car. The metal backing strip is stainless and is quite hard. I've used them to make replacement return springs for door handles. Works a treat yes

                                      Viewing 18 posts - 1 through 18 (of 18 total)
                                      • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                                      Latest Replies

                                      Home › Forums › Beginners questions › Topics

                                      Viewing 25 topics - 1 through 25 (of 25 total)
                                      Viewing 25 topics - 1 through 25 (of 25 total)

                                      View full reply list.