I need to move my motors contol box single phase with cap

I need to move my motors contol box single phase with cap

This topic has 2 replies, 1 voice, and was last updated 19 February 2017 at 13:40 by Martin Newbold.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts

19 February 2017 at 13:38 #285006

Martin Newbold

Participant

@martinnewbold

Hi Am am trying to move my control box on my kitty motor. I presume i have temperature two wires and three s blue red and yellow and black. Can i move this to a different remote switch . Does this or would this work with one of the lever switches

19 February 2017 at 13:38 #8573

Martin Newbold

Participant

@martinnewbold

Can you help please with the electrics

19 February 2017 at 13:40 #285007

Martin Newbold

Participant

@martinnewbold

I have seen lots of control switches that are like a drum how do you wire one of these up please would trailer cable be any good for wiring to main box from motor please?

Currently this is wired as follows:

N -> a

R -> Mains.L

S ->Mains N

T (empty)

W -> yellow motor windings, starter capacitor. brown

V -> red motor windings, starter capacitor blue

b -> (brown into motor temp)

U-> motor blue windings , (brown to motor temp)., motor black windings goes onto lower rail onto U.

Can this be converted to run a http://www.electricmotorwarehouse.com/content/IMAGES/RS1_diagram.jpg switch that is a drum type remote please? Like this http://www.electricmotorwarehouse.com/1-5-hp-2-hp-electric-motor-reversing-drum-switch-position-maintained-rs-1-sh/#sthash.Vq4UY9jK.dpbs

Edited By Martin Newbold on 19/02/2017 13:45:37

Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Archive
  Started by: gregmallitt in: Introduce Yourself – New members start here!
- 3
- 3
- 27 September 2026 at 09:40
  Zan
- Warco VMC start capacitor
  Started by: Durhambuilder in: Electronics in the Workshop
- 1
- 1
- 27 September 2026 at 09:35
  Durhambuilder
- Railmotor regulator drawings
  Started by: duncan webster 1 in: Locomotives
- 2
- 2
- 27 September 2026 at 09:24
  Baz
- Model engineering’s (live steam) big five
  Started by: Luker in: Locomotives
- 6
- 11
- 27 September 2026 at 09:01
  Luker
- Octopus Heat Pump 1 2 3 4
  Started by: Michael Gilligan in: The Tea Room
- 25
- 92
- 27 September 2026 at 07:36
  Michael Gilligan
- Gears
  Started by: Franco Convertini in: General Questions
- 6
- 8
- 27 September 2026 at 06:56
  JasonB
- finding involute gear cutter
  Started by: vic newey in: Workshop Techniques
- 8
- 13
- 27 September 2026 at 06:01
  John Haine
- Wired doorbell to wireless
  Started by: Another JohnS in: General Questions
- 6
- 10
- 27 September 2026 at 06:00
  John Haine
- Taylor Hobson cutter grinder modificaton 1 2
  Started by: David George 1 in: Workshop Tools and Tooling
- 11
- 43
- 27 September 2026 at 00:37
  Mark Rand
- C/H pipe clamp query
  Started by: Mike Hurley in: The Tea Room
- 12
- 14
- 26 September 2026 at 22:11
  Nicholas Farr
- The Big St Albans Model Show
  Started by: Bazyle in: Exhibitions, Shows and Club Events
- 1
- 4
- 26 September 2026 at 21:59
  Bazyle
- Warco WM180 4 way tool post
  Started by: Andy Brocklehurst in: General Questions
- 9
- 16
- 26 September 2026 at 21:42
  southernchap
- Ideas needed for problem wth Tom Senior E type Mill 1 2
  Started by: Mike Crossfield in: Manual machine tools
- 12
- 26
- 26 September 2026 at 18:03
  old mart
- What to do about son’s inheritance.
  Started by: Terry Nicholas in: General Questions
- 1
- 1
- 26 September 2026 at 15:20
  Terry Nicholas
- Worm gear
  Started by: Franco Convertini in: General Questions
- 11
- 20
- 26 September 2026 at 14:32
  ega
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 333
- 26 September 2026 at 14:25
  Phil Whitley
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 48
- 186
- 26 September 2026 at 13:38
  John Hinkley
- Oh dear. What have I done: Wonky Super Major!
  Started by: Colin Thorburn in: Manual machine tools
- 4
- 8
- 26 September 2026 at 10:39
  John Hinkley
- Rob Roy – Order of removal the boiler from the frames
  Started by: Greensands in: Help and Assistance! (Offered or Wanted)
- 4
- 12
- 25 September 2026 at 18:17
  duncan webster 1
- Green Arrow by Martin Evans
  Started by: tatler in: Locomotives
- 4
- 5
- 25 September 2026 at 16:21
  tatler
- Su251-53 1 2
  Started by: parovoz in: Locomotives
- 15
- 29
- 25 September 2026 at 12:54
  Bill Dawes
- Inserting An Angled Feature (Alibre Atom) 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 4
- 33
- 24 September 2026 at 23:51
  Nigel Graham 2
- Drive coil ampere turns for seconds pendulum 1 2
  Started by: carlw in: Clocks and Scientific Instruments
- 6
- 41
- 24 September 2026 at 21:29
  John Haine
- Parting off 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 22
- 52
- 24 September 2026 at 18:55
  old mart
- New Build.. Bentley BR 2
  Started by: Brian Abbott in: I/C Engines
- 4
- 5
- 24 September 2026 at 13:08
  Brian Abbott

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies